Does anyone know how to remove the rubbers without destroying them??
I want to remove my popout windows and rubbers from my 66 fasty but I am nervous that I will either damage the rubbers or break the window....
Any help would be appreciated.
Pat
Howdy
There are 4 screws 2 on the top and 2 on the bottom.They are roughly a third of the way along the rubber. Carefully pull the rubber back and undo the screws and nuts and undo the latch that opens it .
Then carefully push out the class and rubber together with a friend outside helping..
Marc
If you can't laugh at yourself you can't laugh at anyone else! Because life is to short not to LAUGH
Good one Marc....
I was at a loss, at how to do that...
Normal glass isn't too bad but those are really rare....
Glass that bends is pretty rare in any car I would say....
Lee
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---
B carefull however you do it as there not available anymore, so you need to reuse the old existing seals
no problems.
I just got 2 set out of wrecks I have in the back yard and am in the proccess of getting the stuff to try and help the rubbers so I can put 1 set in my daughte'sr 73 fastie when we repaint it .
But as Dave said be VERY carefull with the rubber as it will rip very easily.
Marc
If you can't laugh at yourself you can't laugh at anyone else! Because life is to short not to LAUGH
Try DUBB61 I sold him a 69 Fasty for the pan.Had pop outs fitted which he does not need.
