Here is some pics of my baja. Picked it up last week. I imported it it from a guy in the US. Its been converted to a valiant hemi six engine. Man this car is so fast. Taking it to the local engineer soon, so I can rego it. Cant wait to cruise in it.
[ Edited on 25-9-2006 by Baja Robert ]
[ Edited on 25-9-2006 by Baja Robert ]
WTF?
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
Hope to buy some sunraisers for her, and give her a fresh lick of paint. got to make a bonnet though, as it didnt come with one. Will try to make one out of carbon fibre so as to keep the race look about it.
how appropriate!!
pinhead!
yanks !
No joke, will post some pics soon of it back on aussie soil. Might look a bit strange but is really well engineered under that tin. Was found in florida by a bloke i know over there and cost me $100 US. Cheap as!
r u serious?:alien:duh
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
how big is the hemi??
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourwhy is the bonnet in the back seat???
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourits got a terrific departure angle......gonna make a great baja.....
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
jnr356 wrote:how appropriate!!
pinhead!
Look mate, i know we didnt get off to a good start over that whole egg throwing thing but as I said it was a stupid drunk moment. I hope you dont hold a grudge.
Yep Im serious. Kustomkool will be doing some pinstiping on her for me this weekend. Got some cool stuff lying around that I will bolt on, but first i must get her on the road and legal. Need to suss the brakes as she dont stop that well.
You blokes cant read, DIDNT COME WITH BONNET. these pics were taked in Florida. Some were betwen Florida and Cockatoo Victoria, the bonnet went walk about.
Dont waste your money Rob, its a laughing stock mate. There is no way that can be registered in Australia. Sell it on ebay as a paddock basher.
ok so how do you know its so quick? did u drive it on that flat?
race look...not really.
the wieght bias will be rediculous so even if this isnt all bullshit u will never get it regoed due to that.
also veiwing of tail lights in those locations will be cut off due to the hemiroid (get it) on the rear.
so seriously are you for real?
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
😂 its gotta be a pisstake !!😁
UNBELIEVABLE! 🤪🤘🤓
maybe they used the bonnet for skiing behind the container ship? would be good for the drags though!!!! as long as it has triple webers :thumb:thumb
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook
https://www.facebook.com/FlatFourand something to hold the front end down... man, with the weight sitting so far back i'm suprised its sitting on all fours now.
you have a lot of work ahead of you my friend, but that rear end needs to be reconfigured or you could end up very badly hurt.
:puke
1963 Single Cab Ute: "El Concreto"
1962 Baja Beetle: "Peanut"
1968 Porsche 912 SWB: "Pip"
1972 Kombi Snail: "The Snail"
2012 Skoda Octavia Scout: "Scout"
2016 Scirocco R: "Rocco"
whatever floats your boat i guess...
geeez..this forum is full of such supportive people.
just cos its not your taste doesnt mean its not his taste.
grow up...as i can say..there are some of you who have posted in this thread whos cars i do NOT like.
but i dont mention anything.
"what kinda creator would make a race of people
and make em act a certain way or else He deems 'em evil?
HOW can You give a living being the freedom to breathe
and then lead em into a sea of decievers who greet em, see!"
ummm, well it's certainly interesting. Very, umm, old school in a way I spose.
Robert, you live in possibly the only state where you have a chance of getting it registered. Afterall if Rod Hadfield can put a freakin fighter plane engine in a chev, why shouldn't you own a beetle with a straight 6 in the back? 🤪
I think you might find the conversion was done for the sand dunes or the drags. In which case, going around corners wasn't a high priority to the owner. You are going to have to rethink a few things. I own a buggy with an big subaru in the back and a rear mount radiator. It was an understeering pig from hell until I did some things to try and make it better. This Baja will be a lot worse than mine right from the word go. I'd think seriously about moving as many heavy things to the very front of the car as possible.
Ie. Battery, Radiator, spare tyre, and anything else you can practically move to try and help the weight transfere. Then you will need some very big torsion bars in the back and a big stiff sway bar to stop it rolling around so much. Next you need the softest, grippiest front tyres you can find. About 165/60r15s I'd say, with 18psi in them. On the back, find some sort of hard wide truck tyre and pump it up to 40psi.
Once that's all done, take it out somewhere safe and learn to drive it properly otherwise you will kill yourself in the first week.
If that bug eyed front hasn't got the lights separated from centre to centre at 81cm or more... thats not compliant either then.
ALOT of work... and if that hemi engine is too big to comply, it will totally fry the plans. fingers crossed... anything is possible though...
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
well, if its well engineered then you have some nice mounting points under the engine to bolt on wheels (instead of a wheelie bar) and take it to the drags 😀
Reimagined/Recycled/Upcycled Cool
You could front mount the drivers seat into the bonnet space to balance out the weight.
left hand drive too
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Hehehe...pisstake for sure 👍 :P
gee I hope so. A number of people have been down right rude. Shame AVD shame. 👎
i admit i was a little blunt.
but i think under all the rudeness people dont want to see this fella spend his money on a garage ornament.
i apologise if i have offended and this is a serious post but if it was my money id definatly spend it elsewhere.
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
Aww come on Pete. If it smells like a piss take.....
