SWAP: type 3 door scratch guards help

lethal_oz Casual Dubber

31 posts · joined Sep 2006 · 29 Dec 2006, 8:43 am

#560889

Hi Guys

I have just purchased a pair of ‘new old stock’ type 3 door handle scratch guards from the states that arrived today.
The problem is that either they are for a very early type 3 (around 1962...) or wrong model car.
I'm under the impression that the guards would fit snug into the indent of the door with no gap between the door and the guard.
Without installing these bad boys, its easy to tell that will not fit snug.
The indent on my type 3 1968 is far too deep.

The boxes label is in German (only thing I can read is Volkswagen, approved accessories and mad in Germany)

Its marked:
Erprobtes Zubehor
1 Satz
turgriffmuscheln
000 071 071

If anyone out there has any info on my problem or would like to swap for a pair that would fit a 1968 type 3 square please let me know.

I will try to get some images up today.

Cheers
Lee

bushed Wolfsburg Elder

3,541 posts · joined Dec 2006 · 29 Dec 2006, 11:36 am

#560941

translates to
tested accessory
1 set
doorhandleschells

want any vw bits old but like me, Made in Germany!!!

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 29 Dec 2006, 1:03 pm

#560963

there was some one on here the other week looking for an early door set of scratch plates

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 29 Dec 2006, 1:09 pm

#560964

Ah i just found the post it was you

http://forums.aussieveedubbers.com/viewtopic.php?tid=58741#pid557679

I just found my old set of scratch plates they might fit your car

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

empi Compulsive Aussie Vee Dubber

4,131 posts · joined Aug 2002 · 29 Dec 2006, 2:45 pm

#560987

They wont fit a 68 on type 3 , Scuff plates from a late 68 on beetle will fit your car , if you wish to sell your pre 68 plates i am intersted. Late beetle finger plates are easy to find.

empi

"If at first you don't succeed, skydiving is not for you." - Anonymous 🥷

lethal_oz Casual Dubber

31 posts · joined Sep 2006 · 29 Dec 2006, 7:54 pm

#561040

Cheers guys.
Bushed thanks for the translation... great work.
Dave, the guy looking for them a few weeks back was me...haha good memory
Empi, I would like to try to get my money back on these bad boys as they are in perfect condition, never been used so if I can't swap them to same/similar condition ones that will fit my car was wanting to sell them for around $80 shipped.
Thanks again guys for the info and help