1500 s/a axle removal?

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 · 12 May 2003, 8:53 pm

#46689

This is a no brainer for lots of you I am sure but how do I get the axles out of my 1500 swing axle gearbox - I have undone the nuts holding the little side plate on so I can now see the plastic collar inside and have undone the larger side plate but it won't budge.

Any help is appreciated.
Cheers
Alan

www.dasrestoparts.com.au

aussiebug Officially Full-On Dubber

246 posts · joined Sep 2002 · 13 May 2003, 1:27 pm

#46910

Just inside the gearbox, surrounding the axle, is a very large circlip which fits in a groove in the gearbox housing and holds the axle inside the box.

Just remove the clips (one each side) and the axles will come out.

Rob
Rob and Dave's aircooled VW pages
Repairs and maintenance for the home mechanic
http://www.vw-resource.com

11CAB If ya got it....Baja it

4,674 posts · joined Aug 2002 · 14 May 2003, 7:15 pm

#47368

Presuming the outer axle tube hasn't come off yet??
You need to pull the axle bearing off the axle. Get a puller that can screw into two of the four bolt holes where the backing plate bolts to. Simply wind the bearing and outer tube of the axle (you also need to have undone the side cover which you said you have done.) Then you need to take the circlip out as stated above.
Good Luck
Graham

65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 · 14 May 2003, 10:54 pm

#47486

Thanks for that - the pulley was required to get the bearing off before even getting to the circlip.

Cheers
Alan

www.dasrestoparts.com.au