Please advice regarding narrowed balljoint beam. How many inches of the beam can i take off without cutting anything of the body or modifying the chasis?
Thanks!
3.5 -- 4 inches..
I had my ragtop beam narrowed 80mm which is just over 3 inches. I had a 63 body on the later pan and had to "massage" the inner fender area in with a BFH (big f'ken hammer) for clearance. Didn't need to go in much but it wouldn't have fitted otherwise.
Here is my narrowed beam before painting it, but after "clearancing" the body
Alan
My 54 has a 2.5" Narrowed beam and it is very close. My look at doing the same as DAS with my BFH.
T54
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
2.5" per side? or total? Mind is a 62 body on a 68 pan.
[ Edited on 30-7-2007 by 62ragtop ]
It would be total for sure.
Blank
thanks mate!
total.
T54
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
now.....anyone have a narrowed balljoint beam for sale ready to go? 2.5" of course. I am assuming i don't need anything else to fit a narrowed 2.5" beam. Please let me now if i am wrong.
[ Edited on 17-8-2007 by 62ragtop ]
