I'm after the four bolts that hold the torsion bars (ball joint), to your frame head. I've 'borrowed' them from my farm buggy, but I need to replace them.
Can anyone help?
Regards,
Mark
:thumb
Don't ever let anyone tell you, "It can't be done."
I have got some of them kicking around. You best bet would be to just go to a bolt shop. I can send you the specs in the next few days wehn I get home in the daylight.
Buggy Boyz, just send me the length and the diameter and pitch of the thread. Yes, then I can go to a 'bolt' shop (don't laugh) and buy the correct type.
Thanks for the info.
Regards,
Mark:thumb
Don't ever let anyone tell you, "It can't be done."
just pull one out and take it with you to the "bolt shop"
marcel
type82e (marcel), sometimes you can just get too 'close' to a problem and don't see the obvious answers.
Thanks, I'll take one of the bolts to the shop. Great.
Regards,
Mark:thumb
Don't ever let anyone tell you, "It can't be done."
Just don't do the bolt from the "shop"
Keeping it real !
Silver, very funny😀 I can be a real 'nut' sometimes.
Thanks for the 'thread'. I'll make a 'bolt' for the bolt shop and 'socket' to them.
Mark:P:thumb
Don't ever let anyone tell you, "It can't be done."
