Aussieveedubbers

Cam Identification

0 likes

Share

Log in to reply

phantomeureka Casual Dubber

26 posts · joined Sep 2007 · 2 Feb 2008, 3:37 pm

#630842

Hey i got this cam from a mate(for free). He says its a lumpy cam but cant quite identify it. the numbers stamped on it are VW 6 113 103 1?? (sorry cant make out the last 2). I can upload a pic later but i dont think it will help. any info will be greatly appreciated

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 2 Feb 2008, 6:02 pm

#630862

no help what so ever

the only way you can see whats they are is to put on a center head and use a dial indicator and degree chart to measure them

Some of the after market canms have numbers stamped on them but there hard to identify

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 2 Feb 2008, 7:26 pm

#630865

does it have a number stamped on the end of it (where the cam wheel bolts on) ?

phantomeureka Casual Dubber

26 posts · joined Sep 2007 · 3 Feb 2008, 6:53 pm

#630964

Nope, nothing stamped on except the numbers ive typed in my original post.

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 3 Feb 2008, 7:53 pm

#630971

yeah thats the origional part number from VW they all have that if there a genuine cam

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 3 Feb 2008, 7:54 pm

#630972

if your near a cam grinder shop then you can take it along and have it measured and specked

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409