Any one have some there selling? OR where is the best place to buy and a brand that will be engineered with no issues in NSW
I'm located in hurstville.
Mick058 Custom Title Time!
1,580 posts · joined Jan 2008 ·
WTB - Dropped Spindles, best 'legal' brand
bond Veteran Volks Folk
2,456 posts · joined Jul 2003 ·
dont think any are legal. rod penrose has chromemolly sets avail.
nick
nick
vw54 Administrator Always Waiting 4 Friday
16,723 posts · joined Aug 2002 ·
Get across to Campsie Vintage have them in stock 9789-1777
I read it on FACEBOOK so it must be true
http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630
http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099
http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603
http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409
http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630
http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099
http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603
http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409
Mick058 Custom Title Time!
1,580 posts · joined Jan 2008 ·
All i can say thus far is shop around. Between shops i've had a lowest price of $375 for a pair, and a high price of $580 for a pair. Both CB performance. Also had a couple of second hand forum offers.
Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion
8,040 posts · joined Jan 2003 ·
I can supply for $350.................these are for disc brake ball joint drop spindles........Not drum brake setups which cost you more once you have to buy the brackets etc !!
send me a PM or give me a call 😎
send me a PM or give me a call 😎
xornge666x Wolfsburg Wizard
460 posts · joined Sep 2006 ·
the ball joint ones are easier to do, as they have TUV approval in Europe, having obviously been tested by someone to allow that. You do still need an engineer report (starting about $500 usually) to say they are legal for your vehicle. Once you get an engineer involved with the car, you also need to upgrade a few other areas of the car before they will sign it off.
Link pin ones you need to get tested yourself, to prove they are stronger than the std item. They are, but you need to convince the engineer that, who is going to write a report to say that they are. This is a very expensive procedure...
Golde60 (Kim) on here has a report from a Vic engineer, but certainly is not just going to photocopy it all for you after how much is cost!! Might be able to work something out with him if you plan on using k&l spindles.
Link pin ones you need to get tested yourself, to prove they are stronger than the std item. They are, but you need to convince the engineer that, who is going to write a report to say that they are. This is a very expensive procedure...
Golde60 (Kim) on here has a report from a Vic engineer, but certainly is not just going to photocopy it all for you after how much is cost!! Might be able to work something out with him if you plan on using k&l spindles.