Aussieveedubbers · Buying, Selling & Swapping Cars

Expressions of interest

https://forums.aussieveedubbers.com/threads/74475/expressions-of-interest

Hippy-71 ·

We are considering selling our square back that we've been doing up,it has a strong 1600cc with manual box, new 165 tyres,new 009 dizzy, sports exhaust (sounds great) beautiful interior (1 small tear in the drivers seat back on top ) have done the rust (very small ammount in it ) has been lowered, as you can see the paint has some surface rust coming thru looks great as a rat !
We are wanting to see what interest it causes and are open to realistic offers...cash or trade
























barls ·

you still need the rest of the details mate as per here
http://forums.aussieveedubbers.com/viewtopic.php?tid=25440

Pumba ·

You got a $$$$ in mind.

Type3Sicko ·

$1000? and how much if any rego Thanks

Wannavee ·

pm sent mate
Or just call me 0407 942 151.Lee

krisko ·

how far from rego? and what were you after in exchange?

cheers

squizy ·

barls wrote:you still need the rest of the details mate as per here
http://forums.aussieveedubbers.com/viewtopic.php?tid=25440
What Barls said.

Nice ride, however please fill in the seller details and list a price and preferred contact method. We cannot run dutch auctions on AVD, but as you can see there is interest.

Hippy-71 ·

krisko wrote:how far from rego? and what were you after in exchange?

cheers
Have to do the brake pads on the front, front shocks, and bump stops.

Hippy-71 ·

Ok I hope this clears things up a little.....The square back is located in Umina Beach NSW, about 1hr NTH of Sydney.
It's currently unreg. and almost ready for a blue slip, I have done the rust in it, put new tyres on it, a new 009 dizzy, wiper arms, I have new bump stops, new lowered shocks, brake pads, and inner and outer knuckles for the steering arm on the right hand side.
I want around $3000 ready for the road.
My ph No is 0488 131 182
Email is hippy-71@hotmail.com
I work shift work so either way of contact is fine just leave a message and I'll get intouch with you
I am after a ute D/C or S/C for a project or a Panel.