Ok - baby due in 8 weeks - so selling the last of my vw gear...
Complete 2l Longblock. machined for Sharpbuilt Porsche kit - all welding done - just bolt on, apparently has 1800 heads (I've never looked), spins freely, includes 'buggy' extractors and flywheel, has been sitting for a while and will need freshen-up. $225.
Complete 2L Kombi engine - includes everything (carbs, tinware, exhaust etc). stops after a quarter turn - not sure why. $225.
Twin Italian 40 webers - rebuilt with CB performance kit. Includes manifolds and linkage for type 4 flat engine. Outer bolt holes on the manifold need to be machined as they were set up for 2L porsche (slightly different spacing). very good condition. $650.
Marc
Inala
0408 777 400
Dibs on that 2ltr fee spinnin long block,
Pending it has compression,
& kevin ruds money for youth allowance comes this week.
Can give deposit
👍
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
hey Chris,
First in with $ wins!!!
spins freely - i.e. its not seized
it has compression!
no worries.
Just out of curiousity though, whats ur definition of needing a 'freshen up'?
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Chris, its been sitting for a while - so everything will need to be checked...new oil etc
Complete 2 L sold!
still got the sharpbuilt kit?
would be interested even if no fan.
Pm sent Marc
on DunebuggynBaja
SPG guy wrote:still got the sharpbuilt kit?
would be interested even if no fan.
sorry no cooling - long block only.
DDWR450F wrote:Pm sent Marc
on DunebuggynBaja
Dan, have replied here.
marc
other pms replied to as well!
I tried to call you twice this afternoon Marc, no dial tone it just went straight to message box. I left a voice message.
Was going to see if i could call around this arvo for the engine, i got the $$$. I just wanted to check it out, have a look and ask some questions, and if i'm confident i will hand you the cash.
Its nuffin personal, i just don't want another boat anchor lol.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Hey Chris - sorry mate just got it charged up (didn't have a charger at work).
In any case, looks like the long block and carbs are sold pending payment - will let you all know.
Thanks, Marc