Honda Prelude to Kombi (or beetle) seat conversion brackets

Kuchster Insano Dub Head

762 posts · joined Sep 2003 · 31 May 2009, 4:25 pm

#715793

These were made to suit honda prelude seats (older model) to be able to bolt them down into a bay kombi.

Basically the honda prelude seats bolt into the bracket using high tensile bolts (nuts already welded in) and then bolt down to the kombi also using high tensile bolts and a plate for even distribution.

These allow the honda seats to be fully functional with the sliders and still be able to use all the plastic trim to make it a bit neater.

Not suited if you are very tall, these seats wont be good for you.

$60

Western Syd

Cheers
Kuch

Kuch's Laser Cut Products
http://www.kuch.com.au/laser

eraser Fahrvergnugen

970 posts · joined Mar 2005 · 31 May 2009, 10:25 pm

#715884

I know this will be a dumb question but the bus seats differ from the beetle seat rails?

Kuchster Insano Dub Head

762 posts · joined Sep 2003 · 31 May 2009, 11:12 pm

#715893

For these you actually remove the rails and bolt down to the bus itself, would work in a beetle too, remove rails and bolt to floorpan.

Kuch's Laser Cut Products
http://www.kuch.com.au/laser