Bolts and Banjo fittings Needed (M12 x 1.5mm)

Transparu Seriously Crusin Dubber

154 posts · joined Feb 2003 · 24 Jul 2009, 1:04 pm

#725687

I am looking for second hand banjo bolts and fittings. They are M12 x 1.5mm and about 25mm long (or a little longer). I understand these were used on some early Golfs and other VWs and Audis in the fuel delivery system. They are the same dimensions (but much shorter than) those used in the Transporter/Caravelle auto transmissions to hold and service the ATF cooler.

I need them for my cooler in my Transporter (long story). Has anyone anything like this available? I need the two bolts and the two banjo fittings (preferably with 300-500mm hose still attached).

I'd be really be pleased to have any suggestions.

Thanks

Dave
(Brisbane)

grumble Son of Jim - Creator of Good

2,672 posts · joined Jun 2008 · 24 Jul 2009, 8:03 pm

#725748

Try your local wrecking yard,you will find that a lot of toyotas & mitsubishis use this size on their fuel filters.

Transparu Seriously Crusin Dubber

154 posts · joined Feb 2003 · 24 Jul 2009, 8:50 pm

#725759

Now that is VERY helpful . . thanks Grumble.

Dave

Originally posted by grumble
Try your local wrecking yard,you will find that a lot of toyotas & mitsubishis use this size on their fuel filters. [/quote]