Been meaning to get this off my chest. just finishin the fitting of the reconditioned type 3 rear drum brakes, to notice the hubs have 2 threaded holes in each for bolts to mount them to the outside drum (I'm assuming, as there are 2 holes in the drum itself for the theads).
I have gone through every bolt i could find in my toolbox collection but each have not wanted to mesh into the hub. does anyone know what bolts go into there? or if not, do you have any spare?
I got a few nut and bolt shops around here, but i don't konw what guage, what thread, and as to whether its imperical or metric....
regards,
Christopher.
bajachris88 The international telephone dialing code for Antarctica is 6
6,661 posts · joined Apr 2005 ·
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
