Aussieveedubbers

dismantling kombi gearbox

0 likes

chris1 Casual Dubber

26 posts · joined Aug 2009 · 31 Aug 2009, 12:42 pm

#732631

the kombi box in my buggy is jumping out of gear (1st and reverse). the box is out at the moment, so I thought I might have a look at it, see if I can see what is wrong with it... does anyone have any basic instructions for dismantling th gearbox? any clues what to look for?

Any tips would be greatly appreciated 🙂
Cheers,
Chris

dangerous 23 Windows of Awesome

5,901 posts · joined Jan 2005 · 31 Aug 2009, 1:36 pm

#732641

The bellhousing and input shaft, then differential will have to come out first.
Once the big pinion bearing-nut is removed,
just the 13mm spanner nuts or bolts to remove that hold the assembly in the case.
Most likely the reverse cog is shagged,
first gear problem may be somethig worse, but wait and see.

When you remove the nose cone, make sure the circips are on,
and the mainshaft bearing has not pounded into the nose cone.
Show us the pics.

westi wrote:That's mad Alan.