Cam Gear Fitment

clinker42 Officially Full-On Dubber

381 posts · joined Aug 2008 · 15 Oct 2009, 4:42 pm

#740968

Hi Guys

Just received a SCAT W100 cam and a new gear, went to fit the gear to the cam and have come to a sudden stop. I build engines for a race team and have never ever seen this before. Normally when you fit a cam gear you have a dowel pin or a timing mark on the cam and the gear. The only mark this setup has is the timing mark on the cam gear for alignment with the crank.

Whats the deal when fitting the gear to the cam.

Trev

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 · 15 Oct 2009, 5:17 pm

#740973

Hi

The dot on the gear lines up with the slot for the oil pump. Its the same as a stock cam if you have one handy.

Steve

clinker42 Officially Full-On Dubber

381 posts · joined Aug 2008 · 15 Oct 2009, 5:24 pm

#740975

Hey Thanks Steve

Pretty simple hey lol, if you knew

Thanks again