Nitrous setup Questions

tassy74ida Commited Dubber

58 posts · joined Jun 2009 · 18 Nov 2009, 9:26 pm

#748098

Hi was wanting to get an idea of the types of nitrous setups some of you guys are using?? Is there a plate system for webbers? any input greatly appreciated cheers

polak Everything is alright with enough Vodka :P

913 posts · joined May 2009 · 19 Nov 2009, 5:42 am

#748144

tassy74ida wrote:Hi was wanting to get an idea of the types of nitrous setups some of you guys are using?? Is there a plate system for webbers? any input greatly appreciated cheers

iv been looking into this aswel, and if anyone out there can correct me, as far as i know there aren't any plate systems for idf and ida webers.... which ones are you running? most iv seen run a distribution block and then 4 separate forggers, 2 in each manifold, one per port... cheers adam

VW - helping put oil back into the ground for over 60 years

tassy74ida Commited Dubber

58 posts · joined Jun 2009 · 19 Nov 2009, 6:18 am

#748146

im running ida's, i will make some calls today about a plate system not to sure if there available. Im thinking I will have to run a fogger system like you mentioned. Anybody have any pics of there systems plumbed up??

coletrickle Wolfsburg Wizard

661 posts · joined Apr 2009 · 19 Nov 2009, 3:13 pm

#748187

If you were running a plate type system on a bug its not real pratical when it comes changing the pill/jet as the pills tend to go in each side,fuel on one side gas on the other there is allways something in the way fan shrouds fire walls etc,same thing if you squeeze the fogger nozzels in.You could check out dak-attacks web site and check out how he installed his.And a little tip two fuel solinoids are the go on a flat motor mounted close to each manifold as if you have 1 fuel and 1 gas solinoid mounted in the middle and lines out to each side the gas gets there quicker than the fuel and creates a lean situation until the fuel catches up or you blow shit up!Mcdonald brothers/oz noz are in melbourne pretty close to you they might be worth a call.

tassy74ida Commited Dubber

58 posts · joined Jun 2009 · 19 Nov 2009, 5:39 pm

#748205

cheers for the advice cole. I did talk with the guy from oz nos today, He can do a webber plate kit but not in the idf/ida pattern. He has built kits for a few volksys and had a few interesting ideas. Im thinking I might just have to put together my own kit by purchasing individual parts! Like the 2x fuel soliniod concept.

polak Everything is alright with enough Vodka :P

913 posts · joined May 2009 · 21 Nov 2009, 11:27 am

#748472

have a look at brad's (westside mufflers) setup, he has the foggers plumbed up and looks good... if u cant find it on here i can probably dig up a pic for u

VW - helping put oil back into the ground for over 60 years

reub VWRX is gone...

2,054 posts · joined Sep 2002 · 21 Nov 2009, 11:57 am

#748479

...

1 attachment · Log in to view

Reub

polak Everything is alright with enough Vodka :P

913 posts · joined May 2009 · 21 Nov 2009, 12:25 pm

#748484

thanks reub, saved me going though 200gb of pics to find 😂

VW - helping put oil back into the ground for over 60 years

oldskl60 Officially Full-On Dubber

251 posts · joined Mar 2008 · 21 Nov 2009, 7:45 pm

#748533

You have probably already seen this site but if not....

http://nitrousoutlaws.com/forum/index.php?board=2.0

I found it pretty helpful...

tassy74ida Commited Dubber

58 posts · joined Jun 2009 · 21 Nov 2009, 10:10 pm

#748544

cheers for the info guys, ordered some new M/T slicks for next meet so cant wait to see what happens!!!