WTB - Heater Part · Aussieveedubbers

clinker42 Officially Full-On Dubber

381 posts · joined Aug 2008 · 17 Mar 2010, 12:59 pm

#768151

I am after a plastic part that connects the heater tube of the body to the heater flexible hose that goes onto the heat exchanger.

Its a plastic piece that is rectantangle and has two bolts holding it to the body and then goes to a round hole that the flexible hose connects to.

Its the drivers side on a 1972 beetle.

Thanks Trevor

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 17 Mar 2010, 1:05 pm

#768152

Where u at Trev ???

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

clinker42 Officially Full-On Dubber

381 posts · joined Aug 2008 · 17 Mar 2010, 5:21 pm

#768199

Wodonga

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 18 Mar 2010, 5:57 am

#768306

I havea look at Vintage for you today Its a brown plastic from memory ?? drivers side

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

clinker42 Officially Full-On Dubber

381 posts · joined Aug 2008 · 18 Mar 2010, 7:27 am

#768318

Yep thats it
Thanks

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 · 18 Mar 2010, 9:39 am

#768344

I should have some if Dave can't find and, but by memory you need the body off the pan to fit one without cutting it up first.👎

Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

clinker42 Officially Full-On Dubber

381 posts · joined Aug 2008 · 18 Mar 2010, 5:46 pm

#768416

oh no
That will screw me big time, is it just a few bolts that hold the body on, could I undo em and jack it up in that corner to get this part on or the body has to come all the way off.

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 · 18 Mar 2010, 5:49 pm

#768418

Yeah .... just a few.....32 or 36 ring a bell😁

Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE