Skip to content
Aussieveedubbers

floor pan rubber

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

Volkstang Commited Dubber

50 posts · joined Feb 2010 ·

#769275
Question on fitting floor pan sealing rubber.
Do you fit using glue, cut to lengths? Never done one before?
Thanks Rich 🤪
Cars
1959 Beetle on 1958 pan,,,, going OG and low
1300 Deluxe parts car
1966 Mustang
Mitsubushi Challenger
1997 Subaru Outback (Wife's car)
And owned 40+ cars and still lots more to come 🙂

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 ·

#769278
Yes, yes, yes.
Yes you use glue, a nonhardening windscreen sealant would be good.
Yes you cut to length, keep the front and rear cross pieces full length and the side fron to back pieces to them.
Yes I've done one before. 🙂
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

barls Administrator Causer of Chaos and Mayhem

9,473 posts · joined Jun 2004 ·

#769279
sika flex is what i used on mine 6 years ago.
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me

annosL Officially Full-On Dubber

378 posts · joined Dec 2008 ·

#769347
I pop-riveted mine on with stainless rivets every 100mm or so, worked OK

Volkstang Commited Dubber

50 posts · joined Feb 2010 ·

#769351
Thanks all 🙂
Cars
1959 Beetle on 1958 pan,,,, going OG and low
1300 Deluxe parts car
1966 Mustang
Mitsubushi Challenger
1997 Subaru Outback (Wife's car)
And owned 40+ cars and still lots more to come 🙂

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#769354
use small amount of glue

DONT punch holes for the bolts when the body is on use pointy screwdriver and punch hole that way makesa better seal

you can use Silicon but make sure ite the Roof n gutter one
as at glass and other types are acidic and will cause corrosion

Use the sealer where you have the joins as well

As per above the windscreen sealer is proberly best
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409