6/73 Type Three Square. Stock 1600 with stock dual carbs. Heads appear to have been exchanged and at some time with Brazilian ones so not sure what work has been done.
The story so far: the car had major problems a week or so back. The distributor stuffed up and had too much rotation and the pertronix unit fried. I put the 009 back in for now and the car was ok. Then a few days ago the car started to cut out randomly. Only the engine seems to be affected. Lights and all electrical still work. I have fuel and have tested for power to the coil as well as spark. Timing is correct for the 009 and valve gap is in spec. The motor just dies. There is no misfiring before. Five minutes later the engine starts fine and all is ok. Could it be the condenser? if not I am stumped. As this is my daily driver I need it to be reliable
electricmonk Officially Full-On Dubber
287 posts · joined Aug 2005 ·
And they shall beat their swords into plowshares, for if you hit a man with a ploughshare, he'll know he's been hit