Well as i only have literally half a floor pan i have been attempting to look into getting a new one without much success. I have heard the Gerson from Klassic fab in the states made a re production floor pan i sent him an email a while ago and never got a reply. Does anybody know how to go about getting one to Australia if possible?
he is the only person i know that you can type 3 pans from, that and T3D but its like double the cost of genson's pans and a little bit lower quality.
I need one as well. Doesn't it piss you off that all the important emails never get answered. I sent one to CB a week and a half ago asking a simple question.
..... No answer, and clasicveedub 3 months ago.... No answer, Vintageveedub 3 months ago..... No answer.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
I should have read your post a little better. Only noticed it was in the ghia section and didn't realise it was for a type 3 but some of these sites may still be useful.
Yogie
the ghia pan do fit with modification. But a lot of people would rather not go that path.
Especially...
A: when t3 pans are available.
B: look weird for those who only need one pan replaced.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
I enquired with the Gerson distributor here in Australia a while back....I can't remember the guys name, but here's the web address...
http://www.splitparts.com.au/sb_clients/splitparts/bin/home.cfm
They order direct from Gerson fairly regularly. I can't remember what he quoted for the pans landed in Oz, but I still have it on my work email. I will check it when I get back to work on Tuesday and let you know if you like.
Scarab (aka: Paul)
Thanks. Bookmarked! 👍
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
Thanks hopefully that should put me back on track. As I'm doubting that there will be many floor pans sitting around in tassie
oh cool. Thanks.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
The Samba site quotes $775USD....thats the best part of $900 at the moment.....
you might be able to pick up a donor vehicle for that much with good pans.....then you get all the other bits and pieces too....just a thought.
I am pretty sure the guys at Splitparts quoted less than that I reckon.....I'll keep you up to date when I check my work emails.
Scarab (aka: Paul)
thanks. Finding a donor car is proving difficult considering all of whats for sale out there are earlier models than what I require.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
another thought is a group buy?
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
Also very happy with the quick reply by Elton and quite a reasonable price
what was the price?
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
I'm pretty sure wolfsburg in melbourne sell new pans.
ZachJW wrote:Also very happy with the quick reply by Elton and quite a reasonable price
Thats it!!! Elton!!!!
😂
I found him to be very helpful and enthusiastic to help out. just the sort of service you want when enquiring about parts.
Scarab (aka: Paul)
Well he quoted 1000 for a set landed I assume that's in AUD but told me he will have a more accurate quote once landed he has 4 sets on the way
He would do just one pan as well? I only need the right pan.
The left one still pretty much factory condition, but the right one has had water all over it and now its paper thin.
As well as a perfect carpet ruined 🙅
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
Sorry guys....just went right through my work emails to find my original quote from Elton and can't seem to find it at all.....but the price that ZachJW said sounds about right.
By the looks of the photos I've seen, and reports from those that have already fitted these pans in the States, it would seem that they are worth the money.
Scarab (aka: Paul)
So one pan would be $500 logically?
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
you would hope so 😀
Scarab (aka: Paul)
another part Genson should consider making is the inner guards. Man those things would sell like hot cakes.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
or rust repair sections for quarter panels
yeah? maybe but they are easy to make your self except for the rear. window A pillars! now that would be a win.
I only had one type 3 with that problem though, the rest didn't have rust there 😂👍
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
Mine have rust in both corners of the rear panels and I am struggling for ideas on how to fix it now I've seen the complexity of the shape👎
I was talking about the front ones.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
Are you sure you cant get them out of CIP?
They seemed reasonable when I looked into it a while back for the KG.
A$500- comes to mind landed in Aus (for both sides).
Newt
It is as it is - If you didnt enjoy today, you've missed the opportunity.
yeah but they are kg pans. Thats why its cheaper.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
