Skip to content
Aussieveedubbers

1/4 window

0 likes
Share Share on Facebook Share on X Share on Reddit

roundtoit Commited Dubber

64 posts · joined Jul 2008 ·

#794357
Before i start replacing my passengers side 1/4 window and breaking something, how do you go about this procedure?
any tips appreciated (1968 beetle)
cheers
Hurry up and wait

bushed Wolfsburg Elder

3,541 posts · joined Dec 2006 ·

#794376
remove the trim (doorcard) or just loosen the front half -top side and bottom
possibly inner handle also
with qtr w open remove the rubber seal from the top past the s/steel hinge
u will find this hinge is held in by 2 phillips screws...remove same.....

u will find some 10mm nuts below the pivoting shaft area behind the door card....loosen these to free the post from the clamp ....oil it first and lever it upwards

bear in mind u r handling glass!
want any vw bits old but like me, Made in Germany!!!

roundtoit Commited Dubber

64 posts · joined Jul 2008 ·

#794497
sounds easy🙅
Cheers
Hurry up and wait

uvonja Learner Dubber

10 posts · joined Nov 2010 ·

#813437
It is quite easy, but keep in mind, you are handling glass.