Skip to content
Aussieveedubbers

Want to buy a new stock carbie......Which model?

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

Anthiron The Baja Rejuvenation Begins

4,936 posts · joined Oct 2003 ·

#797244
Hi guys.

There is a bit of play in the throttle shaft of my 30 pict 2 solex and various other worn parts.

I was hoping to find a refurbished 30pict2 on ebay or samba however i seem to only find 30 pict 1 and 30 pict 3 carbs

I know the pict 3 uses the later style 2 screw adjustment system however am unsure of any other changes.

the pict 1 had a smaller float bowl did it not? but used the single screw?

is there any difference in performance between the carbs? and would the pict 3 be hard to tune?

Also i am running a 009 dissy. does the pict 3 need a vacuum advance?


Lots of questions there. maybe someone can give me a 30 pict 101 lesson.

Would prefer a refurb solex over a Brosol/bocar but happy to hear peoples opinions on them.

Nicko
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom

Bone Officially Full-On Dubber

299 posts · joined Aug 2009 ·

#797272
Nick I may have a couple in the shed, will check this arvo if you what to play with a few to try to make 1 good one. Nick, carbs advance the dissy not the other way round. If you have a 009 mech advance dissy, no vac hose needed but block off 1 on carby. Call me on 0417608443...Shane @ cooroy

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 ·

#797275
Get on old Pict rebuilt

Costs about the same
Futue te ipsum!!!

Anthiron The Baja Rejuvenation Begins

4,936 posts · joined Oct 2003 ·

#797285
sorry bone i wasnt clear with what i meant about the vacuum advance. I was refering to the problem that pict 34 solexs have when coupled with 009 dissys and if the pict 3 would have the same problems.

If you had something with a good throttle shaft i would be very interested.



Barry

could you recomend someone to rebuild/rebush a solex for me? I have put numerous gasget kits through my current setup however it is just very sloppy due to wear.
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 ·

#797288
Down here Carburettor Service Company
240 Parramatta Road
Burwood 2134

http://www.carburettorservice.com.au/

I am sure you can post

They did a brilliant job re-bushing mine
Futue te ipsum!!!