57 Panel Officially Full-On Dubber
279 posts · joined Jun 2003 ·
Does anyone know of a good website with more info than you get with a rebuild kit, ie a poorly photocopied picture. :bounce
after 34 PDSIT-2 rebuild website
kombi69 Seriously Crusin Dubber
193 posts · joined Jul 2003 ·
try www.type2.com (I haven't looked but they've got quite a few step by steps)
KruizinKombi Seriously Obsessed Cyber Dubber
3,493 posts · joined Aug 2002 ·
If you can get hold of the Bentley workshop manual, it has a section on the PDSIT carby. I'd offer to scan it for you, but I'm flat out at the moment, sorry. 🙂
Kruizin Kol
Phil74Camper Head in the Clouds
2,703 posts · joined Aug 2002 ·
The Australian Gregory's manual is pretty detailed. It is a white manual with a blue Kombi on the cover.
Try your local library - go to 629.1 in the Dewey system and look for Volkswagen manuals. They are usually gathered in alphabetic order. If they don't have the Gregory's manual, they may have the Bentley, Haynes or InterEurope manual instead.
Try your local library - go to 629.1 in the Dewey system and look for Volkswagen manuals. They are usually gathered in alphabetic order. If they don't have the Gregory's manual, they may have the Bentley, Haynes or InterEurope manual instead.
KruizinKombi Seriously Obsessed Cyber Dubber
3,493 posts · joined Aug 2002 ·
The Gregory's is an easy to read manual, but I found that it didn't have the info I needed on this carby when I was having trouble with mine. 🙁 The Bentley has more detailed info for this carby. :thumb
(Gee, I hope Ben Durie doesn't read this! 😉)
(Gee, I hope Ben Durie doesn't read this! 😉)
Kruizin Kol
Phil74Camper Head in the Clouds
2,703 posts · joined Aug 2002 ·
I've always liked the Gregory's manual myself. I use a UBD street directory!
When I rebuilt my Kombi's carbs, I used a combination of the photocopied sheet that comes with the rebuild kits, and the Gregory's manual. Between the two of them I got everything right. I prefer to keep my Bentley's away from the garage...it was too expensive to get greasy fingermarks on. I read that one in the house before I head down to the garage.
Or borrow it from the library, and put greasy fingermarks on THEIR copy...
When I rebuilt my Kombi's carbs, I used a combination of the photocopied sheet that comes with the rebuild kits, and the Gregory's manual. Between the two of them I got everything right. I prefer to keep my Bentley's away from the garage...it was too expensive to get greasy fingermarks on. I read that one in the house before I head down to the garage.
Or borrow it from the library, and put greasy fingermarks on THEIR copy...
Secoh Fahrvergnugen
926 posts · joined Sep 2002 ·
www.motortraders.net will find one for you even if they dont stock it. 🙂
If it aint broke,
Make it go faster!!
Make it go faster!!