Skip to content
Aussieveedubbers

Brake drums

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

baghall Ben Hal Outlaw Bushranger

1,021 posts · joined Jan 2010 ·

#831510
May be a stupid question but is it possible to change the stud pattern from a wide 5 to a small 5 pattern by changing the rear brake drum on a swing axle type 1?
68 Baja - It's a growing pain!
58 Baja ute - and the pain spreads!
85 T3 Kombi - still growing
89 T3 Kombi - parts car

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#831514
you will have to change the brake drum and also the backing plate as well

Also the spacer will have to be adjusted due to the length of the axles


you could get away with this by changing the axles and outer tubes as well but it will work
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409