I have two larger fuel line 'outlet' and 'inlets' welded to my fuel tank for future use. However there is a VERY small leak at the weld.
So small, that it takes 24 hrs for a wet patch to appear, and dries up before it even drips or makes a puddle. However in the process, it does make the garage smell like fuel and the area has a wet dampness look to it.
Is there a brush on seal coat that is fuel resistant i can just lather on to do a final seal for what i assume is just perosity in the weld?
any suggestions?
THanks,
Christopher.
bajachris88 The international telephone dialing code for Antarctica is 6
6,661 posts · joined Apr 2005 ·
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
