Skip to content
Aussieveedubbers

2080 engine

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

Beach n Manx Learner Dubber

11 posts · joined Jul 2009 ·

#871669
2080cc $6300

Bore and Stroke 94 x 75.5, Off-Set ground Pobjoy crank, 8 Dowel lightweight flywheel
Camshaft 235 degree@ 0.050" , 0.475" lift, CB Performance 1.25:1 forged rockers
Deep filter sump
Blueprinted
O-Ringed Oil pump with filter
Scat lightweight lifters
Original VW Heads, Custom ported and polished, 39MM X 34MM valves, 9.75:1 Compression ratio
CB Performance 8MM head studs
Jaycee Racingpushrod tubes, Chromoly thickwall pushrods

twin 40MM Solex HDWM carbs as new
G.A.S. Bosch Electronic ignition system
New Alternator USA
Wide cooling fan

This engine has done less than 1000 km since build and has been set up in the Manx buggy as a demo and is for sale. Geoff the builder operates his business from a small town outside Maryborough Qld. Geoff has been busy supplying many trike riders with new motors after their "new"1916 motors expired after less than 1000 miles. I have spoken to several people that have had engine rebuilds done by Geoff and they all have good references. I got sick of taking my Po? to specialist VW mechanics to get it running right and found that i could have bought this engine saved a lot of dollars and had more useable performance. Buggy is in Surfers Paradise.
I would be confident to use this as a daily driver

Call Mark on 0400 633 263 for more info

Beach n Manx Learner Dubber

11 posts · joined Jul 2009 ·

#883371
pm reply sent

Beach n Manx Learner Dubber

11 posts · joined Jul 2009 ·

#883580
We don't have any output figures as we have not put this on the dyno. Could be done if interested.

DubCrazy Custom Title Time!

1,295 posts · joined Jul 2003 ·

#883584
very intrested..

would like to have more info as regards to what sort of figures are expected from this combination

steff.....
Life with out a v-dub is no life at all!!!!!

Ollie Yeah Buddy

840 posts · joined Oct 2009 ·

#883646
I'd have to imagine this would be around the 110-125hp figure? At the treads?

If I could hazzard a guess 🙂
Follow the Photo Fun:
http://forums.aussieveedubbers.com/viewtopic.php?tid=95238

- '70 1500 Beetle (The Clean One)
- '76 1300 Beetle (The In-between One)
- '69 1500 Beetle (The Mean One)

vassy66T1 Wow ... are U reading this?

2,120 posts · joined Jun 2003 ·

#883648
Anything more than 100hp would be doing well IMO. I think under 100HP at the wheels

Beach n Manx Learner Dubber

11 posts · joined Jul 2009 ·

#883856
This has been designed for a flat power curve to push the bigger tyres on the Buggy and develop power mid range up. Expect output just below the 100. Will try and dyno on Monday to see how close we are.

Volksdaze Commited Dubber

64 posts · joined Sep 2010 ·

#884323
Beach n Manx wrote:This has been designed for a flat power curve to push the bigger tyres on the Buggy and develop power mid range up. Expect output just below the 100. Will try and dyno on Monday to see how close we are.
it's monday ??? ( i'd be saying 85 hp )

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 ·

#884335
Geoff has a good reputation as an engine builder.......I'm keen to see hp results too.....🙂
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

Beach n Manx Learner Dubber

11 posts · joined Jul 2009 ·

#884577
I dont like Mondays. With all the reporting I had to do prior to End of Month and 2 staff down and inability to get our timing right was not able to get a run in. Will reschedule for a better time. Only one week to go before I leave the Gold Coast I should be able to organise something for next week.