Skip to content
Aussieveedubbers

bonnet cable question

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

DubCrazy Custom Title Time!

1,295 posts · joined Jul 2003 ·

#872311
on my 68 it has the bonnet release handle inside the glove box. i was doing some work under the bonnet and had a new glovebox to fit. after i fitted the glove box i am sure i tightened the cable clamp that sits just behind the glove box and was ready to check everything worked before shutting the bonnet. I had to help my wife with something and left the car, while doing so it started to rain and my son closed the bonnet to stop it getting wet. Now the problem is the bloody bonnet wont open!!! it feels like the cable is slipping on the clamp and not releaseing the catch... Does any one have any idea how i can get it bugger open with out destroying the new glovebox?? i cant even drive the car as all my tools were just loose under the bonnet as i hadn't packed up!!

cheers

steff.......
Life with out a v-dub is no life at all!!!!!

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#872314
the only way to get it opened is to cut the handle in half and unwind the screws that hold it onto the bonnet

Time for a new bonnet handle and it a back up tie wire from the latch to under the front guard to use incase the cable fails

Another alternate is to get a choke cable from Auto one and fit it into the under dash area and use it instead of the one in the glove box
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#872318
Hi

This is what you need to do with lever to get just a bit more travel that can sometimes pull the cable enough open the bonnet. You pull the lever over so that it can go past its normal stop.

Steve

1 attachment · Log in to view

ian.mezz I never said, I could write or spell

3,913 posts · joined Sep 2004 ·

#872340
I got my bonnet open with a big srcew driver, by gettin in the hole behind the spare wheel from under the car.
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲

hulbyw Insano Dub Head

819 posts · joined Sep 2009 ·

#872429
This has been covered before. You can try putting a towell through the handle and pulling down on the towell with a strong sudden jerk to try and release the bonnet catch. This seems brutal but worked for me when the release cable broke. Worth a try before cutting the handle!
Cheers...wayne

DubCrazy Custom Title Time!

1,295 posts · joined Jul 2003 ·

#872782
1303Steve wrote:Hi

This is what you need to do with lever to get just a bit more travel that can sometimes pull the cable enough open the bonnet. You pull the lever over so that it can go past its normal stop.

Steve

cheers for that it worked! i had tightened the clamp on the cable but not in the right spot so it wasnt quite releasing

cheers for the help...

steff.................
Life with out a v-dub is no life at all!!!!!

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#872823
Hi

That's great news, now fit another emergency cable under the mudguard, hide a spare key to the car in your boot and your bullet proof.

Steve