FS: Used 1600 Piston and Barrel Kits

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 16 Jan 2012, 8:41 pm

#881763

Item: 1600cc Piston and Barrel Kits
Condition: Used but reconditioned
Description: I have several P&B kits that are left over from 1915 conversions. The Barrels have been freshly honed, so they just need new rings to make them ready to be installed. These would be perfect for upgrading a 1300 or 1500 motor.
Price: $95 per kit plus postage.

I'm happy to post or they can be picked up from Galston NSW

Contact can be made via PM
Cheers
CT

1 attachment · Log in to view

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 19 Jan 2012, 5:22 pm

#882199

bumpsie

whatnow Custom Title Time!

1,000 posts · joined Jan 2003 · 19 Jan 2012, 7:08 pm

#882215

do you have 2 87mm p & c's ?

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 19 Jan 2012, 9:48 pm

#882246

I will have a look for you Henry.........I think I have a good set of 4 that I may sell.

whatnow Custom Title Time!

1,000 posts · joined Jan 2003 · 20 Jan 2012, 12:39 pm

#882351

thanks craig, i'll pass if it is a good set. i only really need 2 ok ones. it's just for a shooting buggy engine.

the idiot previous owner left the car outside on a rainy day with the aircleaner off. 😠

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 22 Jan 2012, 9:44 pm

#882721

Hi Henry, I only have the good set of 4....sorry.

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 26 Jan 2012, 7:37 pm

#883507

Only 2 kits left..........these are perfect for a future rebuild 🙂

Beerboy Custom Title Time!

1,030 posts · joined Jul 2004 · 28 Jan 2012, 6:26 pm

#883865

you got pm mate :-)

WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 1 Feb 2012, 10:25 am

#884641

one back at ya !!

ready to send 😉

kombibob AKA: Volkswagen Type 2 Transporter Van Robert

1,698 posts · joined May 2004 · 1 Feb 2012, 11:08 am

#884653

Don't have any 1300 ones do you?
Wanting to build down a 1600 to 1300 so I can run my judson.
I have one good set but the wrist pins are smaller than 1600 so thinking they could be 1200???
Cheers,
Bob

1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout

Get down low and go,go,go

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 1 Feb 2012, 11:14 am

#884655

I will have in about 2 weeks....as I'm converting my 1300 to a 1600 !!!

Do you need heads as well ?

kombibob AKA: Volkswagen Type 2 Transporter Van Robert

1,698 posts · joined May 2004 · 1 Feb 2012, 11:20 am

#884656

Sweet .
Have a good set of 1300 sp heads.
Do you know if 1300's came out with smaller wrist pins at any stage?
Cheers.

1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout

Get down low and go,go,go

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 1 Feb 2012, 12:18 pm

#884661

1300,1500,1600 are the same.......36hp are smaller.

I think 1200 are also the same size as 1300 etc