Skip to content
Aussieveedubbers

Seats

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

TorxKiwi Officially Full-On Dubber

231 posts · joined Jun 2011 ·

#890109
Ok, still working through the list.

'75 L Bug, 3-point seats which are functional but far from comfortable. What seats have others upgraded to and can I have some photos of how the mounting has been done.

I intend to do this 'legitimately' and have an engineer sign off on the work, so if you've got great shots of the bit of fencing wire anchoring your modification congratulations and good luck, but not really what I'm looking for 😉
"Ownership of a Beetle is not a destination it is a journey."

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 ·

#890114
OK - this is what I did

Original base


modified base
I used the "top" of a Recaro rail off an Audi. The Audi has a similar base but one of the "legs" is wider
You need the flat base as the standard base sits too high. This would be easy to make. 2 bits of channel with some bar through the middle




Then I added some Recaros out of a Proton GTi that I picked up for $600 off ebal
Futue te ipsum!!!

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 ·

#890116
I swapped passenger for driver so as the adjustment wheel was on the inside and adjustable with the door closed.
These seats have flip adjusterd on both shoulders

Futue te ipsum!!!

TorxKiwi Officially Full-On Dubber

231 posts · joined Jun 2011 ·

#890119
Exactly the sort of info I was after. They actually look like something I could fit my 6ft height and 100kg mass into and still feel my legs when I get out!!!
"Ownership of a Beetle is not a destination it is a journey."

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 ·

#890121
You have to be REAL carefull of the base
The standard seat, although the base is higher, somehow your bum sits low.

If it is too high your thighs will hit the steering wheel

I'm 5' 11" and 90kgs and these work great

The Recaros are the easiest to bolt onto the base.
You can see the bracket I made up in the 4th pic to give some tilt

If you are going this way i can take mor pictures when you go to build the bases
Futue te ipsum!!!

beetleboyjeff Custom Title Time!

1,790 posts · joined Feb 2009 ·

#890147
I just used some narrow Autotechnica's from Autobarn.

I got my engineering shop to cut the adjusters and slides out of my original seat bases, and we fitted them to a frame we had made up to fit the seats.

This is the bases in the car.


Then these were bolted to the seats.


and the seats were fitted into the car.


VERY happy with how they have worked out - very comfortable and they give great support.
From your ole' mate Jeff

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#890149
Hi

You must double check the height to ensure the seats are at the correct height.

I mounted Honda Prelude seats in my sons 74, it had the older style stock mounts, I ended up cutting side hoop section on his eats in half to get the low enough.

Steve