Skip to content
Aussieveedubbers

Type I stainless exhaust, splitty cargo doors, bugpack truss bar and more...

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 ·

#892073
Having a bit of a clean out of my bits and pieces that I haven't used in the last few years - need some space and hence the following is up for sale.

Location: Burleigh Heads
Contact: Al (0417 645 854) or PM or al@dasrestohaus.com.au
NB - these are my own personal bits and not related to my business

One of Westi's 1 1/2in merged stainless steel headers (no muffler) - this is a very nice system with extremely high quality workmanship. Compare it to the cheap chinese knock offs and you'll certainly know the difference pretty quickly. New and unused
$250 #SOLD#






Boxed and ready to go (can courier if required at additional cost)
www.dasrestoparts.com.au

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 ·

#892075
Late model (low top hinge) splitty cargo doors. These have been given basic bodywork and a coat of primer for protection however the lower inners (beneath seal area) has rust and would need repair if you are doing a full tilt resto. Outer skin is okay. One small crack just below swage line pictured on exterior otherwise in fantastic shape for someone who's cargo doors are knackered.
$350 (pair) ##SOLD##









Could freight but will be additional cost to pack/box plus courier fees.
www.dasrestoparts.com.au

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 ·

#892078
Unsure of manufacturer - splitty cargo door outer rocker. We use Klassic Fab parts hence don't need this one any more, probably okay for someone doing localised repairs on their rocker.
$15 - ##SOLD##



Can courier at extra cost
www.dasrestoparts.com.au

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 ·

#892080
Splitty rear hatch (early) with prop and glass. This rear hatch is in excellent shape rust wise with no signs of pitting on the bottom inner or outer. Only downside is its had something heavy on the inside diagonally across and dented it (pictured as best as I could). Screws were obviously siezed on body and hence hinge area has been ground away around some holes unfortunately. Would be a lot easier to repair than a rusty hatch (trust me I know).
$180








Packing and courier would be at additional cost
www.dasrestoparts.com.au

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 ·

#892081
Splitty post 58 front and rear bumpers. Front is in pretty good shape with a couple of dents and some rust pitting but rear is pretty hammered plus has beetle exhaust cutouts but includes brackets and splash pans.
$100 (for the pair) ##SOLD##






Pickup only
www.dasrestoparts.com.au

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 ·

#892082
Set of four T4 rims and near new tyres (but will fit T3). 5 x 112 pattern (same as bay window) - these rims have been painted in black gloss two pack then new 205/70 x 15 Khumo thin band white wall tyres fitted. I ran them on my T3 for around 1000kms before selling the van and keeping the wheels....but don't need them any more. Tyres are still in excellent shape with 90%+ tread. Two wheels pictured but four included....two have had centre bores clearanced to fit the T3 hubs.
$250 (I paid $440 for the tyres alone) ##SOLD##




Pickup only unless you want to organise your own courier.

Cheers
Al
www.dasrestoparts.com.au

5lam AKA: BlackBug

520 posts · joined Mar 2006 ·

#892112
Wanna sell the reverse light off the splitty bumper seperately??

Custom doesn't come in a Box

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 ·

#892131
No idea if it works but yeah, $20.... but $10 if you come and take it off yourself before the bumpers sell 🙂
www.dasrestoparts.com.au

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 ·

#892156
Bugpack truss bar, new unused still in box, bolt in not weld in. Again not a cheap Chinese knock off....not as nice as Craig's kafer bars but price reflects that:
$170 ##SOLD##

Bugpacks spiel:
Our new Truss Bar ties in the frame horns to the shock towers on the rear of all Type 1 suspensions both swing axle and IRS for the added support necessary when any form of performance driving is anticipated. Our Truss Bar assembly is a complete bolt-in kit-No welding required! Kit is supplied with all necessary hardware for linking the frame horns to the shock towers and then supporting the bridge across the shock towers. Adjustable rod ends allow for the ultimate adjustability and adaptability for easy fitment to vehicle applications as well as preload adjustment for competition style uses. Added support to the frame horns helps eliminate flexing and twisting which causes wheel hop and frame horn damage. Truss Bars are an excellent addition to any street or off road application! Some trimming may be required around the original shock boss for certain applications.




www.dasrestoparts.com.au

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 ·

#892157
BlackBug wrote:Wanna sell the reverse light off the splitty bumper seperately??
Bumpers are now sold so if you want the light it's yours for $20 if I have to pull it off....or $10 if you come and do it ASAP. Its obviously non-vw as I'm sure you know Cheers
www.dasrestoparts.com.au

aintgotitmusthaveit Officially Full-On Dubber

295 posts · joined Jun 2006 ·

#892178
I'll take the bug pack bars
Pm me your account details and postage to Melbourne

shokwave2 Officially Full-On Dubber

289 posts · joined Mar 2010 ·

#892183
PM sent regarding header.

5lam AKA: BlackBug

520 posts · joined Mar 2006 ·

#892238
I can get down there Monday avo if that's okay??

Custom doesn't come in a Box

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 ·

#892478
BlackBug wrote:I can get down there Monday avo if that's okay??
No probs mate, tomorrow arvo is fine
www.dasrestoparts.com.au

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 ·

#892480
Klassic Fab LHD sill and early splitty second hand rear hatch still available - open to reasonably offers.
Cheers
Al
www.dasrestoparts.com.au

5lam AKA: BlackBug

520 posts · joined Mar 2006 ·

#892563
What time are you there til, Al??

Custom doesn't come in a Box