WTB Steering damper mount

AndrewB Seriously Crusin Dubber

141 posts · joined Jun 2011 · 15 Jun 2012, 12:23 am

#908075

Anyone know where i can get something like this in australia?

http://www.mooreparts.com/store/product/1233/AC750103/

My beam is freshly painted and im Not keen to weld a bracket on and repaint.

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 15 Jun 2012, 6:57 am

#908089

buy one from that shop will be cheaper in the lng run

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

AndrewB Seriously Crusin Dubber

141 posts · joined Jun 2011 · 16 Jun 2012, 12:24 am

#908301

they dont ship to aus?

empi Compulsive Aussie Vee Dubber

4,131 posts · joined Aug 2002 · 16 Jun 2012, 11:10 am

#908344

Pull one off an oval or early beetle... up to 60 ish if memory serves

"If at first you don't succeed, skydiving is not for you." - Anonymous 🥷

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 · 16 Jun 2012, 11:58 am

#908352

Steering dampers were only added in 1960

earlier models didn't have them

LEE

- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

AndrewB Seriously Crusin Dubber

141 posts · joined Jun 2011 · 16 Jun 2012, 10:59 pm

#908457

yes yes i know,
I have a narrowed beam, and got rid of my original tie rods and narrowed a later set so i would have the hole for the steering damper,
and i painted the beam without thinking of welding on a bracket, so im looking for a bolt on unit before i go screw up my paint by welding on it.