| [ Total Views: 871 | Total Replies: 9 | Thread Id: 100244 ] |
|
|
 Allbones
Officially Full-On Dubber
Posts: 395
Threads: 58
Registered: July 5th, 2012
Member Is Offline
Location: Ipswich QLD
Theme: UltimaBB Pro Black
|
 posted on December 23rd, 2012 at 10:07 AM |
|
|
Woops - Drop Spindle Query
So my Airkewld package arrived! YAY!
Problem is, I ordered the disc brake drop spindles as I have a set of disks for my bug, catch is I'm pretty sure these disks fit onto drum spindles
 I tried slipinf one of the disks onto the spindle and its a no go,
bearings are too big.
My question is, do I need to go and buy some drum drop spindles, or can I just get bearings that have a smaller internal Diameter to match the spindle
I have?
Cheers, Johnny.
|
|
|
lohoon
Wolfsburg Wizard
Posts: 466
Threads: 67
Registered: September 5th, 2002
Member Is Offline
Location: muswellbrook
Theme: UltimaBB Pro Yellow
|
| posted on December 23rd, 2012 at 12:33 PM |
|
|
Hey Johnny,
Check to see if your brake calipers will bolt onto the spindles. If they do, go buy some bearings and off you go. If the calipers don't fit you will
have to either buy different calipers or spindles.
Good luck
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on December 23rd, 2012 at 01:24 PM |
|
|
I think the inner bearing can be changed to fit either a ball joint spindle or a link pin spindle, the outer bearing od is different, i think the
bearing bore is machined on the rotor to suit a bearing that fits a link pin spindle, you could just press a stepped sleave into the outer bearing
bore or see if you can get a bearing to suit the current bore and ball joint spindle diameter.
|
|
|
Allbones
Officially Full-On Dubber
Posts: 395
Threads: 58
Registered: July 5th, 2012
Member Is Offline
Location: Ipswich QLD
Theme: UltimaBB Pro Black
|
| posted on December 23rd, 2012 at 09:26 PM |
|
|
Thanks for the advice guys, will see how I go 
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on December 23rd, 2012 at 10:31 PM |
|
|
Unless otherwise stated in the product blurb I think you'll find that the std VW caliper will fit the dropped spindle.
As for the bearings do what the others said as there is a vast range of sizes for taper bearings
madness is in the eye of the beholder  |
|
|
Allbones
Officially Full-On Dubber
Posts: 395
Threads: 58
Registered: July 5th, 2012
Member Is Offline
Location: Ipswich QLD
Theme: UltimaBB Pro Black
|
| posted on December 23rd, 2012 at 11:13 PM |
|
|
| Quote: | Originally
posted by psimitar
Unless otherwise stated in the product blurb I think you'll find that the std VW caliper will fit the dropped spindle.
As for the bearings do what the others said as there is a vast range of sizes for taper bearings
|
I didnt pick up on it when I ordered (have since looked and found it) airkewld do mention that the spindles will pretty much only fit their disk brake
kits...
No huge biggie though if its just a case of different bearings.
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on December 24th, 2012 at 11:28 PM |
|
|
| Quote: | Originally
posted by Allbones
| Quote: | Originally
posted by psimitar
Unless otherwise stated in the product blurb I think you'll find that the std VW caliper will fit the dropped spindle.
As for the bearings do what the others said as there is a vast range of sizes for taper bearings
|
I didnt pick up on it when I ordered (have since looked and found it) airkewld do mention that the spindles will pretty much only fit their disk brake
kits...
No huge biggie though if its just a case of different bearings.
|
Not such a bad thing as believe Airkewld use Wilwood calipers and they are nice brakes
madness is in the eye of the beholder |
|
|
Allbones
Officially Full-On Dubber
Posts: 395
Threads: 58
Registered: July 5th, 2012
Member Is Offline
Location: Ipswich QLD
Theme: UltimaBB Pro Black
|
| posted on January 7th, 2013 at 11:23 AM |
|
|
So, calipers dont fix to the spindles
Looking at Wilwood calipers now, thinking two piston calipers (around $130 or so each). Just have to try and match something up with the disks I have
now.
such a headache from something I though I was doing right
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on January 7th, 2013 at 11:32 PM |
|
|
well before you go looking for the calipers I'd be making sure the discs you have will fit the spindles with correct bearings and then you'll be
able to measure things for getting the correct caliper
madness is in the eye of the beholder |
|
|
Allbones
Officially Full-On Dubber
Posts: 395
Threads: 58
Registered: July 5th, 2012
Member Is Offline
Location: Ipswich QLD
Theme: UltimaBB Pro Black
|
| posted on January 10th, 2013 at 11:34 AM |
|
|
did abit of digging and I'm pretty sure that this is the disk brake kit I have, so an easy out may be just trying to find some Empi disk brake drop
spindles and see if that saves me. haha.
This one here: http://www2.cip1.com/ProductDetails.asp?ProductCode=C13-22-2926
|
|
|
