Posts: 310
Threads: 93
Registered: February 19th, 2011
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Blue ( Default )
Mood: painfully happy
posted on April 28th, 2013 at 07:32 PM
help
ok I think I am sure that to remove the cooling fan and the rear case section on a squareback engine the fan if forced off with the 2 m10 bolts off
the crank yes?
cheers
vw gods
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
posted on April 28th, 2013 at 08:10 PM
I usually split the alloy housing, but yes, after removing the crank bolt, two M8 bolts will push the hub off altho I attach a puller there so as to
not damage the case. Easy to make a puller using two M8 bolts, a flat bar with two holes and the long crank bolt
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
clyve
Officially Full-On Dubber
Posts: 310
Threads: 93
Registered: February 19th, 2011
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Blue ( Default )
Mood: painfully happy
posted on May 2nd, 2013 at 06:05 PM
got it
thanks has the run to dubs in the abby been sorted yet?
