| [ Total Views: 647 | Total Replies: 15 | Thread Id: 103292 ] |
|
|
 torana
Slammed & Awesome Dubber
Posts: 85
Threads: 20
Registered: January 18th, 2009
Member Is Offline
Location: South Aust
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 1st, 2013 at 12:03 PM |
|
|
Engine wiring to test engine
Hi guys
i have a type3 engine in its frame with gearbox mounted to it, but its out of the car.
i want to test it, as i have just purchased it.
So far i have the neg coil wire to the distributor, then the positive to the battery. and battery solinoid to positive, battery neg to engine
casing.
ive turned it over via a screw drive across the starter terminals.
its a 6v early motor.
im getting no spark from the coil, is this because its a 6v coil?
any help appreciated.
thanks, Muz 
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 1st, 2013 at 12:07 PM |
|
|
do you have battery positive to coil??
Futue te ipsum!!!
|
|
|
torana
Slammed & Awesome Dubber
Posts: 85
Threads: 20
Registered: January 18th, 2009
Member Is Offline
Location: South Aust
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 1st, 2013 at 12:13 PM |
|
|
yeah, positive from battery to coil
|
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 1st, 2013 at 12:19 PM |
|
|
then have you definitely got gap in your points
can you hear a click when you turn by hand?
Futue te ipsum!!!
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on September 1st, 2013 at 05:26 PM |
|
|
If you have power to the coil + and the green wire from the distributor to the - of the coil the points should cause a spark at the coil lead when you
open the points with a screwdriver,I would guess that the points are corroded particularly if it has been standing for a while. Clean the points with
a bit of 220 wet & dry paper,make sure you have a gap when the rubbing block is on the cam.
|
|
|
torana
Slammed & Awesome Dubber
Posts: 85
Threads: 20
Registered: January 18th, 2009
Member Is Offline
Location: South Aust
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 2nd, 2013 at 08:11 PM |
|
|
thanks bizarre and grumble
i'll give thata try on the weekend
|
|
|
novasmic
Officially Full-On Dubber
Posts: 251
Threads: 46
Registered: October 28th, 2012
Member Is Offline
Location: Cessnock NSW
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 2nd, 2013 at 10:02 PM |
|
|
Are you using a 12v battery or 6v ? if your using a 12v battery you will need to change the coil, the 6v starter will handle the 12v but the 6v coil
will NOT. You will need to change the coil.
|
|
|
torana
Slammed & Awesome Dubber
Posts: 85
Threads: 20
Registered: January 18th, 2009
Member Is Offline
Location: South Aust
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 3rd, 2013 at 07:23 PM |
|
|
i'm using a 12v battery
i used a 6v coil first up, then changed over to a 12v coil.
still the same problems though
|
|
|
novasmic
Officially Full-On Dubber
Posts: 251
Threads: 46
Registered: October 28th, 2012
Member Is Offline
Location: Cessnock NSW
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 3rd, 2013 at 08:19 PM |
|
|
you will need to change the condenser on the side of your distributor as well, for a 12v one.
|
|
|
torana
Slammed & Awesome Dubber
Posts: 85
Threads: 20
Registered: January 18th, 2009
Member Is Offline
Location: South Aust
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 4th, 2013 at 07:40 PM |
|
|
do you need the condensor hooked up?
i thought this was just to suppress noise for radios.
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on September 4th, 2013 at 08:47 PM |
|
|
There is no difference in the condensers a 12v or 6v distributor will work,the condenser is rated in microfarads not volts.
|
|
|
novasmic
Officially Full-On Dubber
Posts: 251
Threads: 46
Registered: October 28th, 2012
Member Is Offline
Location: Cessnock NSW
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 4th, 2013 at 09:15 PM |
|
|
yes you need to hook it up, im not 100% sure if they are the same 6v to 12v but i had allways changed anyway. 100% sure you need to have it connected
up.
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on September 5th, 2013 at 06:23 PM |
|
|
| Quote: | Originally
posted by torana
do you need the condensor hooked up?
i thought this was just to suppress noise for radios.
|
The condenser is fitted to the side of the distributor and in most cases the primary wire is attached to it so unles you cut the wiring on the dist it
will be ok,just clean the points or fit a new set,adjust them and try it again.
|
|
|
torana
Slammed & Awesome Dubber
Posts: 85
Threads: 20
Registered: January 18th, 2009
Member Is Offline
Location: South Aust
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 6th, 2013 at 09:50 PM |
|
|
ok thanks guys
i'll be giving it a try tomorrow
|
|
|
AA003
A.k.a.: Phill
Custom Title Time!
Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline
Location: Southern Highlands
Theme: UltimaBB Streamlined2
|
| posted on September 7th, 2013 at 06:57 AM |
|
|
| Quote: | Originally
posted by novasmic
im not 100% sure if they are the same 6v to 12v but i had allways changed anyway.
|
I am 100% sure.
You cannot buy a 6V condensor. They are all the same 6V,12V & 24V.
I read it on samba, so it must be correct.
Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!
|
|
|
torana
Slammed & Awesome Dubber
Posts: 85
Threads: 20
Registered: January 18th, 2009
Member Is Offline
Location: South Aust
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 7th, 2013 at 06:19 PM |
|
|
got spark and preliminary firing...plus an actual small fire 
is OK, was contained (excess fuel from filling carby)
will get some new fuel line tomorrow, as the old stuff leaked after the fuel pump finally sucked some fuel up. 
|
|
|
