Posts: 11
Threads: 7
Registered: September 12th, 2002
Member Is Offline
Location: Preston,UK
Theme: UltimaBB Pro Blue ( Default )
Mood: indifferent
posted on November 14th, 2002 at 08:24 AM
pedals
daft question is it possible to get a new accelerator pedal, i mean the bit that is fixed to the floor. My car has had a floor pan change an the old
pedal was knackerd i mean it was rusting and just didnt work well, the floor around it was like a lake and the pedal was rusting away so i don want to
put it back on any advice.
Chris Walmsley
----------------------------
74 1303 "Gene"
Che Castro
Custom Title Time!
ankle straps
Posts: 1945
Threads: 79
Registered: August 25th, 2002
Member Is Offline
Location: Sydney, Australia
Theme: UltimaBB Pro Blue ( Default )
Mood: (( }:-{D]
posted on November 14th, 2002 at 09:29 AM
yep sure is! Are u talking about replacing the hinge bit at the base of the pedal? I recently replaced mine, the hinge on the floorpan is held to it
by 2 or 3 spotwelds, all u need to do is to drill thru them and voila. The hinge on the pedal is welded on so u have to weld it to fix it up. and
make sure u use a bold with a nyloc nut instead of the stock pin, as the stock pin can sometimes fall out and leave u on full throttle....