| [ Total Views: 3064 | Total Replies: 10 | Thread Id: 22977 ] |
|
|
 BenettonVW
Super Administrator
AVD Forum Founder
Posts: 3125
Threads: 185
Registered: August 26th, 2002
Member Is Offline
Location: Country Vic, Australia
Theme: UltimaBB Pro Blue ( Default )
Mood: Slammed.. & BLINGED UP!!
|
| posted on May 15th, 2004 at 10:29 PM |
|
|
Dent pullers?
Where does one get those dent pullers? The ones where you weld on the nails or whatever, then isn't there a little pulling device you can get or
something to pull on the welded pins/ nails?
I'm a little in the same basket as Frenzix as the advice on the mig welder purchasing, but I also want to be capable of doing this method rather than
bog or drilling holes and doing it...
Does any of this make sense?
THE LOWEST WITH THE MOSTEST BLING BLING WINS!!
|
|
|
vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on May 16th, 2004 at 09:24 AM |
|
|
Go along to yr local panel shop n ask them. They usuall spot a washer onto the panel and use a hook through the hole to pull. works great on small
dents.
|
|
|
 DubCrazy
A.k.a.: steff
Custom Title Time!
Posts: 1295
Threads: 145
Registered: July 18th, 2003
Member Is Offline
Location: Gladstone Qld
Theme: UltimaBB Pro Blue
Mood: painting anything in front of me
|
| posted on May 16th, 2004 at 09:30 AM |
|
|
sounds like you are talking about a "pin puller" it welds a small pin to the panel and you use a slide hammer with the right fitting to pull the
dents out. There are two main types you can get one is souly a pin puller the other is a spot welder to. Cost wise the pin puller will be much
cheaper and you will be able to get it from any good tool suppliers.
hope this was of some help
steff.................... |
|
|
BenettonVW
Super Administrator
AVD Forum Founder
Posts: 3125
Threads: 185
Registered: August 26th, 2002
Member Is Offline
Location: Country Vic, Australia
Theme: UltimaBB Pro Blue ( Default )
Mood: Slammed.. & BLINGED UP!!
|
| posted on May 19th, 2004 at 09:52 PM |
|
|
Okay, cool, thanks. Who's got one? Anyone?
THE LOWEST WITH THE MOSTEST BLING BLING WINS!!
|
|
|
johny rotten
Officially Full-On Dubber
Posts: 366
Threads: 5
Registered: April 6th, 2004
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 19th, 2004 at 10:39 PM |
|
|
go and see a Wurth supplier they sell a good paintless dent system.
|
|
|
helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on May 20th, 2004 at 08:24 AM |
|
|
We have a machine that does that without even needing the slide hammer attachment. It is called an 'air puller' made by FAN. They cost about
$3500.
The cheapest way out in your case may be to oxy bronze a small plate on and pull off that with a slide hammer. The slide hammer would cost about $200
and could be used for pulling out all manner of damage, and even brake drums and stuff.
After the plate has been used to pull the dent out, you can heat up the bronze and the plate will come off with no holes.
Remembering though depending on the depth of the dent, the metal will tear if you pull it too hard no matter what method you use.
|
|
|
VWFOOL
Bishop of Volkswagenism
King for a day, Fool for a lifetime.
Posts: 3436
Threads: 572
Registered: September 3rd, 2002
Member Is Offline
Location: Newcastle - Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: inspired yet?
|
| posted on May 20th, 2004 at 08:02 PM |
|
|
57 panel has one, ask him
++++++++++++++++++++++++++++
One man's junk...
|
|
|
57 Panel
Officially Full-On Dubber
Posts: 279
Threads: 56
Registered: June 3rd, 2003
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 24th, 2004 at 10:00 AM |
|
|
Dent Pullers
I have one made by H & S in America. The most common type is called Easy Beat I think. Worth their weight in gold, especially when working on a
bus where you can't get to the other side of most of the panels. Tell me if you want me to post any pictures. The only problem is the cost. Your
looking at about $1500.
ADAM......
|
|
|
BenettonVW
Super Administrator
AVD Forum Founder
Posts: 3125
Threads: 185
Registered: August 26th, 2002
Member Is Offline
Location: Country Vic, Australia
Theme: UltimaBB Pro Blue ( Default )
Mood: Slammed.. & BLINGED UP!!
|
| posted on May 26th, 2004 at 08:37 PM |
|
|
Oh man... You still using yours? Wanna rent it?!? 
THE LOWEST WITH THE MOSTEST BLING BLING WINS!!
|
|
|
57 Panel
Officially Full-On Dubber
Posts: 279
Threads: 56
Registered: June 3rd, 2003
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 27th, 2004 at 09:08 PM |
|
|
Dent puller
A mate of mine is using it at the moment. I still have a lot of dents to remove. If your restoring a couple of cars it's worth investing in one if
there is a fair bit of panel work. If you get one at a good price you should get back what you paid for it.
|
|
|
BenettonVW
Super Administrator
AVD Forum Founder
Posts: 3125
Threads: 185
Registered: August 26th, 2002
Member Is Offline
Location: Country Vic, Australia
Theme: UltimaBB Pro Blue ( Default )
Mood: Slammed.. & BLINGED UP!!
|
| posted on May 28th, 2004 at 07:33 PM |
|
|
Yeah true, it is just the outlay.. :o
THE LOWEST WITH THE MOSTEST BLING BLING WINS!!
|
|
|
helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on May 29th, 2004 at 08:48 AM |
|
|
Have a look at this company and ring them for a price. This is a simpler version of what we use.
http://www.vgautopaints.com.au/easy.htm
|
|
|
Cruzin in a Golf
Wolfsburg Wizard
Posts: 406
Threads: 23
Registered: October 13th, 2003
Member Is Offline
Location: Bendigo, Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: Crazy!
|
| posted on June 3rd, 2004 at 12:21 PM |
|
|
is there any cheaper way of removing dents?...as i dont have a welder
"I choose to Cruze VW Golf Mk1 Style!!!"
 |
|
|
