[ Total Views: 6186 | Total Replies: 9 | Thread Id: 29872 ] |
|
kombi_kid
Super Moderator
Good Kid too many projects
Posts: 124
Threads: 341
Registered: August 27th, 2002
Member Is Offline
Location: brisvegas
Theme: UltimaBB Pro Blue ( Default )
|
posted on October 11th, 2004 at 12:30 PM |
|
|
range rover V8 into a kombi?
hey
anyone heard opf this being done??? my mums friends husband did one not so long ago but was wondering if anyone has any info on it??
this is into a bay window kombi
cheers
rhys
it aint just cool its aircool'd
|
|
kombikim
A.k.a.: Kim
Custom Title Time!
disfunctionally capable
Posts: 1521
Threads: 84
Registered: December 18th, 2002
Member Is Offline
Location: Sydney, Concord West
Theme: UltimaBB Pro Blue ( Default )
Mood: always bleary
|
posted on October 11th, 2004 at 12:33 PM |
|
|
Wacked1 's vehicle (P76 , same dimensions ) & there is another one somewhere on the internet
Please, I need drivers side window regulator (winder mechanism) for my '54
|
|
KruizinKombi
A.k.a.: Col
Bishop of Volkswagenism
Seriously Obsessed Cyber Dubber
Posts: 3493
Threads: 104
Registered: August 25th, 2002
Member Is Offline
Location: Gippsland, Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: Indifferent
|
posted on October 11th, 2004 at 02:11 PM |
|
|
Sherman has adapter kits for these.
Kruizin Kol
|
|
kombi_kid
Super Moderator
Good Kid too many projects
Posts: 124
Threads: 341
Registered: August 27th, 2002
Member Is Offline
Location: brisvegas
Theme: UltimaBB Pro Blue ( Default )
|
posted on October 11th, 2004 at 04:32 PM |
|
|
ok kool i wasnt sure about wacked1's but kool!! i will talk to this friend anyway's see what sort of money its gonna cost!
cheers
rhys
it aint just cool its aircool'd
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
posted on October 11th, 2004 at 04:45 PM |
|
|
The engine blocks are all aluminium alloy... One Light V8..!!
I have seen one in a bay window ute... tray top...
Nothing is impossible... just depends on whether You have enough money....
Lee
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
Andy
Son of Jim - Creator of Good
Andy's Adventures
Posts: 2816
Threads: 181
Registered: November 5th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy Man
|
posted on October 11th, 2004 at 05:46 PM |
|
|
I have seen a number done here in QLD (P76 motor that is).
You need to remove the rear panel behind the fan to fit them in (cut body work). You also need to be careful with radiator placement and ducting to
prevent over heating.
It's also a good idea to use a 2L GB and fit big wheels to keep the revs down. 3600rpm at 100kph is screaming for a V8.
The thing I always worry about is making a fast kombi stop and steer! Scary!!! (Oh, most states require disc rear brakes also!)
|
|
wacked1
Custom Title Time!
Posts: 1508
Threads: 302
Registered: July 8th, 2003
Member Is Offline
Location: western Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: naked
|
posted on October 11th, 2004 at 07:28 PM |
|
|
what do you want to know mate .
isold the complete conversion for $1500
anything else let me know?????
YOU HAVE JUST BEEN DAKED
don't worry it's a VW thing
|
|
wacked1
Custom Title Time!
Posts: 1508
Threads: 302
Registered: July 8th, 2003
Member Is Offline
Location: western Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: naked
|
posted on October 11th, 2004 at 07:31 PM |
|
|
braking in NSW is not a problem standard brakes, BTW they stop fine never had any problems with the brakes. only other problem is when you nail it
going around a corner , the front wheels tend to leave the ground.
cheers
wacked1
YOU HAVE JUST BEEN DAKED
don't worry it's a VW thing
|
|
kombi_kid
Super Moderator
Good Kid too many projects
Posts: 124
Threads: 341
Registered: August 27th, 2002
Member Is Offline
Location: brisvegas
Theme: UltimaBB Pro Blue ( Default )
|
posted on October 11th, 2004 at 10:37 PM |
|
|
hey
mmmmmm all very interesting you have any data sheets on the P76 motor wacked??? just hp ratings etc??
what are the things to look out for when purchasing the motors obviously the aluminum block would be prone to cracks etc???
also what is comment on the big wheels thing wacked that andy said?? i have 215/70/16 wheels at the moment but am going down to 205/55/16 soon?
do you have any trouble with sump clearance when the bus is dumped?
cheers
rhys
it aint just cool its aircool'd
|
|
wacked1
Custom Title Time!
Posts: 1508
Threads: 302
Registered: July 8th, 2003
Member Is Offline
Location: western Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: naked
|
posted on October 13th, 2004 at 10:20 AM |
|
|
no accurate data on the motor, but mine made about 150 rear wheel HP with 1 dead plug and lead, cracked distributor cap never got it back on the dyno
after it was fixed I sold it, the reason being is if you want a little more poke out of a Leyland you gotta spend up big, others will tell you
that’s not the case, for example if you want to put a 4BBL carby on you have to get specially made as these motors only came out with a 2BBL carby
and the parts are getting hard to find also.
I encountered no trouble with sump clearance and mine was low at the rear still had a little in it too once I notched the spring plates. as you can
see in the pic below
the thing with the rear wheels in relation to gearing this is from my experience, I noticed the bigger in overall diameter the wheels are the lower
the revs are, when i had the desert duller tiers on (30 inch tall) it cruised at very low rpm (can't tell exact figures had no rev counter at the
time) but once I put the 16's on with 215, 50 series tiers the revs jumped up not too much but still it was noticeable, I’m going larger profile
tiers on the back and lowering it a bit more (going for the tuff rear look)
pic to wet your appetite
Cheers
wacked1
Sump clearance shot, as you can see this conversion was done using a standard kombi xmember the sump doesn’t sit lower than the xmember
YOU HAVE JUST BEEN DAKED
don't worry it's a VW thing
|
|
wacked1
Custom Title Time!
Posts: 1508
Threads: 302
Registered: July 8th, 2003
Member Is Offline
Location: western Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: naked
|
posted on October 13th, 2004 at 10:24 AM |
|
|
and need to do a little cutting like this
YOU HAVE JUST BEEN DAKED
don't worry it's a VW thing
|
|
kombi_kid
Super Moderator
Good Kid too many projects
Posts: 124
Threads: 341
Registered: August 27th, 2002
Member Is Offline
Location: brisvegas
Theme: UltimaBB Pro Blue ( Default )
|
posted on October 13th, 2004 at 04:16 PM |
|
|
oh ok sweet as i will look into it!!! sounds very interesting!! are an of the latish model land rover V8's any good?
cheers
rhys
it aint just cool its aircool'd
|
|