| [ Total Views: 674 | Total Replies: 8 | Thread Id: 41387 ] |
|
|
 helterskelter400
Fahrvergnugen
Posts: 900
Threads: 62
Registered: August 25th, 2002
Member Is Offline
Theme: UltimaBB Pro Grey
|
 posted on July 6th, 2005 at 08:15 PM |
|
|
buggy waterproofing
hokay.
the other post proved its past time to waterproof the buggy. http://www.aussieveedubbers.com/forum/viewthread.php?tid=41255
the air intake was high enough. i've found the little breather hole on a spare trans and will hook a breather hose onto mine when its next
accessible.
- do the rubber dizzy covers work or do i just use freezer bags and tape on an as needed basis?
- i can put the engine breather higher. wonder how much water gets in through other places like the oil filler and oil slinger?
- how well to the leads seal, is there a better way to make them seal?
- do i silicone over the coil terminals?
- if it keeps running i dont need to put a hose on the exhausts?
is it possible to get it so it keeps running a bit longer when submerged, i almost made it through. seems though it was electrics that stopped it.
then it was the sitting waiting to get it out that contaminated the engine and trans oils.
 nn[ Edited on 8-7-2005 by helterskelter400 ]
:thumb
|
|
|
VWCOOL
23 Windows of Awesome
Posts: 5158
Threads: 235
Registered: June 19th, 2003
Member Is Offline
Location: In the shed... Lake Macquarie NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: happy to help
|
| posted on July 6th, 2005 at 10:33 PM |
|
|
I just read in the BAJA BUGS AND BUGGIES book I bought how the dizzy has breather holes on its underside... the dizzy cap isn't water tight... oil
filler and breather will let in water and ignition leads aren't waterproof at the ends
Pay your debts, CxxT
|
|
|
Chewy
Fahrvergnugen
Posts: 889
Threads: 75
Registered: July 18th, 2004
Member Is Offline
Location: Geelong, Vic
Theme: UltimaBB Pro Blue ( Default )
Mood: Buggered
|
| posted on July 6th, 2005 at 10:53 PM |
|
|
Wheres the breather on the trans?
did the pan tunnel fill up with water, and is there a way to drain it?
.
|
|
|
Desert Moose
A.k.a.: Chris Hill
Veteran Volks Folk
Cut Cut Cut
Posts: 2098
Threads: 175
Registered: March 4th, 2004
Member Is Offline
Location: Perth W.A.
Theme: UltimaBB Pro Black
Mood: I don't know if I'm indecisive
|
| posted on July 7th, 2005 at 12:36 AM |
|
|
| Quote: | Originally
posted by helterskelter400
- do the rubber dizzy covers work or do i just use freezer bags and tape on an as needed basis?
|
I use a rubber glove and zippy ties and silicone 3 of the holes in the bottom ( leave the lowest one)
|
|
|
VWCOOL
23 Windows of Awesome
Posts: 5158
Threads: 235
Registered: June 19th, 2003
Member Is Offline
Location: In the shed... Lake Macquarie NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: happy to help
|
| posted on July 7th, 2005 at 06:43 AM |
|
|
| Quote: | Originally
posted by Chewy
Wheres the breather on the trans?
did the pan tunnel fill up with water, and is there a way to drain it?
|
small hole at the top/front... Highest point of the gearbox. Will need drilling or similar to add a solid pipe so a hose can be clamped on and routed
up high
Pan tunnel has drain hole near gearbox front mount which will let water in!
Pay your debts, CxxT
|
|
|
VWCOOL
23 Windows of Awesome
Posts: 5158
Threads: 235
Registered: June 19th, 2003
Member Is Offline
Location: In the shed... Lake Macquarie NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: happy to help
|
| posted on July 7th, 2005 at 06:44 AM |
|
|
| Quote: | Originally
posted by Chewy
Wheres the breather on the trans?
did the pan tunnel fill up with water, and is there a way to drain it?
|
small hole at the top/front... Highest point of the gearbox. Will need drilling or similar to add a solid pipe so a hose can be clamped on and routed
up high
Pan tunnel has drain hole near gearbox front mount which will let water in!
Pay your debts, CxxT
|
|
|
helterskelter400
Fahrvergnugen
Posts: 900
Threads: 62
Registered: August 25th, 2002
Member Is Offline
Theme: UltimaBB Pro Grey
|
| posted on July 7th, 2005 at 09:23 AM |
|
|
a plastic micro irrigation fitting screws in and will get epoxied in place.
and i've got one of those jeff hibbert buggy books. thanks for reminding me. i will have to get it back off of the guy i lent it to...
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
:thumb
|
|
|
helterskelter400
Fahrvergnugen
Posts: 900
Threads: 62
Registered: August 25th, 2002
Member Is Offline
Theme: UltimaBB Pro Grey
|
| posted on July 8th, 2005 at 11:56 AM |
|
|
oh yea.. and the pan and tunnel filled. tunnel seems to have drained most out the empty heater control holes. air compressor blew out the rest i
hope.
looks like there will only be 1 rubber glove under the kitchen sink after this weekend. haha
:thumb
|
|
|
Sandy
Officially Full-On Dubber
Posts: 254
Threads: 14
Registered: April 19th, 2005
Member Is Offline
Location: Brisbane
Theme: XMBX Pro Green
Mood: hmmm
|
| posted on July 8th, 2005 at 07:04 PM |
|
|
Zip ties around the rubber boots on the leads works a treat.
|
|
|
