Subject: What Mask to use when sanding BOG and PAINT??
ruckus
Veteran Volks Folk
Posts: 2118
Threads: 165
Registered: June 19th, 2004
Member Is Offline
Location: Osaka, Japan
Theme: UltimaBB Pro Blue ( Default )
Mood: Pretty strong for a chalk-pusher
posted on October 19th, 2005 at 02:42 PM
What Mask to use when sanding BOG and PAINT??
What type of mask should be used when sanding away bog and paint w/elec sander/angle grinder? Cheers!
**This is REN using RUCKUS computer.....
helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
posted on October 19th, 2005 at 03:41 PM
If you are using disposable masks, get P2 style with the valve for easier breathing. They will cost you about $3 each in a box of 10.
Otherwise get a rubber mask with a replacable cartridge capability. You can then get organic filters which filter out thinner and paint fumes also.
They are not suitable for two pac. They usually go fo $20-$25 with the cartriges being about $8 each to replace. They are available with one or two
cartrige holes, and that just means they go for twice as long, but you need to buy two cartriges.
