Posts: 107
Threads: 28
Registered: May 11th, 2005
Member Is Offline
Location: Tennessee, USA
Theme: UltimaBB Pro Blue ( Default )
posted on February 23rd, 2006 at 11:18 AM
Exhaust and Alternator Bracket
I thought I would post a few pics of the alternator bracket that I fabricated and exhaust header that I welded. I think the welds look pretty good for
my first time welding. I moved the alternator to the other side so I could still run the air conditioning. I still have to weld up a few holes in the
intake manifold and relocate the vacuum line to the backside of the intake manifold. With the exhaust maniflod bolted up I have approx. 8" ground
clearance. I plan on running a magnaflow or borla muffler. I was going to weld in the muffler right after the Y adapter then run the exhaust out the
stock locations. The header originalyl came from a 1.8 Suby.
Thanks,
Richard
Error
Sorry, you must be a registered user in order to download attachments.
Error
Sorry, you must be a registered user in order to download attachments.
Error
Sorry, you must be a registered user in order to download attachments.
flat_iv
Seriously Crusin Dubber
Posts: 107
Threads: 28
Registered: May 11th, 2005
Member Is Offline
Location: Tennessee, USA
Theme: UltimaBB Pro Blue ( Default )
posted on February 23rd, 2006 at 11:19 AM
more pics
[ Edited on 23/2/2006 by flat_iv ]
Error
Sorry, you must be a registered user in order to download attachments.
Error
Sorry, you must be a registered user in order to download attachments.
Error
Sorry, you must be a registered user in order to download attachments.
