Board Logo
Go To Bottom

Printable Version  
[ Total Views: 4414 | Total Replies: 22 | Thread Id: 52212 ]
Author: Subject:  which kombi radiator?
Membercrazyfiggi
A.k.a.: Alex
Wolfsburg Wizard
***


Avatar


Posts: 657
Threads: 138
Registered: June 23rd, 2003
Member Is Offline

Location: sydney, north side.
Theme: UltimaBB Pro Blue ( Default )
Mood: lost

posted on May 15th, 2006 at 08:37 PM
which kombi radiator?


Hey everyone, what radiators does everyone run under their kombis? Would it need to be bigger than the standard subaru liberty one? At the moment im thinking about using either vl commodore or falcon with the standard thermo fans. Whats everyones thoughts on this?
Thanks,
Alex.
Memberkevo
A.k.a.: kevo Milner
Officially Full-On Dubber
***


Avatar


Posts: 371
Threads: 53
Registered: March 22nd, 2005
Member Is Offline

Location: wanneroo, perth WA
Theme: UltimaBB Psyche Green
Mood: always happy

posted on May 16th, 2006 at 12:22 AM



it really doesnt matter too much man, common sense really,
there is no 'correct size' for a rad, the trick is to have constant air flow and make sure of no hot or 'used' air is in curculation through the rad, fins fix this if its underneath etc...

there is so many friggin forums for this discussion, go back to privious pages and you will find heaps o info




76 baywindow kombi - V8 & Weddle racing diff and gearbox
Daily driven beach cruiser
Membervwtyp2
Son of Jim - Creator of Good
******


Avatar


Posts: 2504
Threads: 160
Registered: September 18th, 2003
Member Is Offline

Location: Hillcrest S.A.
Theme: UltimaBB Pro Blue ( Default )
Mood: over it

posted on May 16th, 2006 at 09:14 AM



hx holden v8 fits nicely between the chassis rails

Error
Sorry, you must be a registered user in order to download attachments.


Error
Sorry, you must be a registered user in order to download attachments.


Error
Sorry, you must be a registered user in order to download attachments.




Most people seem normal, till you get to know them.
MemberGeorgeL
Officially Full-On Dubber
***


Avatar


Posts: 231
Threads: 11
Registered: February 5th, 2006
Member Is Offline

Location: 7200 miles off the Queensland coast
Theme: UltimaBB Pro Blue ( Default )

posted on May 17th, 2006 at 02:21 AM



Quote:
Originally posted by crazyfiggi
Hey everyone, what radiators does everyone run under their kombis?


I don't think that there is any "common" radiator. It seems to be more what is available and what the individual is used to working with.

You want the radiator to fit the space (between rails, below rails, your choice!).

You want it to have as large a surface area as possible, since you don't get as much ram air effect underneath.

You want the inlet and outlet to be in a convenient location to run straight aft.

It is better to have a larger surface area radiator, as opposed to a multiple core radiator, in low airflow applications. You have a lot of room under there, so why not use it!

Shrouding is really important. You need to keep hot air separate from cold air.

George
Memberpete wood
A.k.a.: figure itout
23 Windows of Awesome
********


Avatar


Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline

Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands

posted on May 17th, 2006 at 11:45 AM



Quote:
Originally posted by crazyfiggi
Hey everyone, what radiators does everyone run under their kombis? Would it need to be bigger than the standard subaru liberty one? At the moment im thinking about using either vl commodore or falcon with the standard thermo fans. Whats everyones thoughts on this?
Thanks,
Alex.


No, it should not need to be bigger as long as it gets enough airflow.

Standard thermos should be ok as long as they are shrowded.

The best place for good airflow, is the front of the car. Everywhere else is compromised in some way. That's not to say it can't be made to work though. My rad is at the back, helbus/brad's rad are underneath. But it takes scoops and other such stuff.

If you want simple, buy a metal spare wheel cover for the front bullbar. Put the rad inside it and have the front of the wheel cover replaced with ricer mesh to let the air in. It will be subtle and cool well. No one will know it's even a radiator unless they look very closely. You might need a square rad though.



[ Edited on 17-5-2006 by pete wood ]




"stoopid is stronger than axles"
http://drivingnotpolishing.blogspot.com.au/ 
MemberHotRodMatt
Wolfsburg Elder
If it's old or rare - cut it!
*******


Avatar


Posts: 3616
Threads: 361
Registered: September 3rd, 2002
Member Is Offline

Location: West of Sydney
Theme: UltimaBB Pro Blue ( Default )

posted on May 17th, 2006 at 11:51 AM



If you put it up front don't make it look like a dogs breakfast.

Make it tidy...
http://www.cbbvw.com/ADMIN/RadBus.jpg
Memberpete wood
A.k.a.: figure itout
23 Windows of Awesome
********


Avatar


Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline

Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands

posted on May 17th, 2006 at 01:08 PM



don't tell me you call that TIDY.:(

I hated all the louvres in the front of the CBB limo. Ruined the whole front panel IMHO. But then I guess it's just my opinion.




"stoopid is stronger than axles"
http://drivingnotpolishing.blogspot.com.au/ 
Membercrazyfiggi
A.k.a.: Alex
Wolfsburg Wizard
***


Avatar


Posts: 657
Threads: 138
Registered: June 23rd, 2003
Member Is Offline

Location: sydney, north side.
Theme: UltimaBB Pro Blue ( Default )
Mood: lost

posted on May 17th, 2006 at 08:50 PM



Thanks everyone, im heading out to pick n payless this weekend to have a look at some different radiators. Hopefully i will be able to find something that will fit between the chassis rails nicely. Has anyone ever used two radiators in their systems? A big one under the car and a smaller one in the side of the engine bay which would also be used for filling the system? Its just an idea even tho i will most likely be using just one.
Thanks,
Alex.
Memberkombibob
Custom Title Time!
AKA: Volkswagen Type 2 Transporter Van Robert
*****


Avatar


Posts: 1698
Threads: 173
Registered: May 15th, 2004
Member Is Offline

Location: noosa hinterland
Theme: UltimaBB Psyche Grey
Mood: at by cows

posted on May 17th, 2006 at 09:17 PM



try this http://community.webshots.com/user/danzin 
now my bus




1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout

Get down low and go,go,go
MemberGeorgeL
Officially Full-On Dubber
***


Avatar


Posts: 231
Threads: 11
Registered: February 5th, 2006
Member Is Offline

Location: 7200 miles off the Queensland coast
Theme: UltimaBB Pro Blue ( Default )

posted on May 18th, 2006 at 03:57 AM



Quote:
Originally posted by crazyfiggi
Thanks everyone, im heading out to pick n payless this weekend to have a look at some different radiators. Hopefully i will be able to find something that will fit between the chassis rails nicely. Has anyone ever used two radiators in their systems? A big one under the car and a smaller one in the side of the engine bay which would also be used for filling the system? Its just an idea even tho i will most likely be using just one.
Thanks,
Alex.


Two radiators are a Bad Idea unless you absolutely have to use them. You end up with balancing problems and with a plumber's nightmare of hoses. On a bus you will have plenty of room, either underneath or in front, to use one good-sized radiator.

George
Memberboof2332
Custom Title Time!
*****


Avatar


Posts: 1210
Threads: 120
Registered: May 10th, 2004
Member Is Offline

Location: Beecroft Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Sympathetic

posted on May 18th, 2006 at 07:07 AM



I would consider using two like the porsche 996, only if they were new and next to no $$$. There is no reason why you need two if you have the option. The second as a fill pot would be a waste of space and not needed if the other is set up properly. Also if you are going turbo, then you may need another radiator for water to air cooler ...if you used that option.

I am about to do a split wrx conversion and I will be using one.

Matt
Membercrazyfiggi
A.k.a.: Alex
Wolfsburg Wizard
***


Avatar


Posts: 657
Threads: 138
Registered: June 23rd, 2003
Member Is Offline

Location: sydney, north side.
Theme: UltimaBB Pro Blue ( Default )
Mood: lost

posted on May 18th, 2006 at 08:55 PM



Thanks everyone, ill have a go at it and post my set up here when im done.
Alex.
Memberpete wood
A.k.a.: figure itout
23 Windows of Awesome
********


Avatar


Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline

Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands

posted on May 19th, 2006 at 10:59 AM



Quote:
Originally posted by boof2332
I would consider using two like the porsche 996, only if they were new and next to no $$$. There is no reason why you need two if you have the option. The second as a fill pot would be a waste of space and not needed if the other is set up properly. Also if you are going turbo, then you may need another radiator for water to air cooler ...if you used that option.

I am about to do a split wrx conversion and I will be using one.

Matt


I hope you'll be putting some bracing in the body to handle the torque.




"stoopid is stronger than axles"
http://drivingnotpolishing.blogspot.com.au/ 
Memberfurgonesto
Learner Dubber
*


No Avatar


Posts: 14
Threads: 1
Registered: May 20th, 2006
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on May 20th, 2006 at 09:43 PM



i have seen the danzin homepage( http://community.webshots.com/user/danzin ),i like the conversion and it is very similar and my vw vconversion
some body could give my the email? i would like ask him some quiestions
my adress is ernestora2@hotmail.com
Memberaxel77
Learner Dubber
*


No Avatar


Posts: 11
Threads: 3
Registered: August 26th, 2006
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on August 31st, 2006 at 04:28 AM



What about relocating the battery, and using two small linked radiators in series(with individual shrouding and thermos) to cool the engine bay as Vw intended. That way you don't have 18 litres of coolant in your system as I do with the radiator up front, or a radiator hanging down underneath which compromises the offroad ability, or on the back where it doesn't cool properly becuase of the low pressure cell. If I were to do it again I'd go split system. What do you guys reckon?

Take it easy, Axel.
Memberbaybuscamperkid
Compulsive Aussie Vee Dubber
prince of insufficient light, ruler of heck
*******


Avatar


Posts: 4316
Threads: 335
Registered: August 25th, 2002
Member Is Offline

Location: Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: transported

posted on August 31st, 2006 at 06:15 PM



Quote:
Originally posted by axel77
What about relocating the battery, and using two small linked radiators in series(with individual shrouding and thermos) to cool the engine bay as Vw intended. That way you don't have 18 litres of coolant in your system as I do with the radiator up front, or a radiator hanging down underneath which compromises the offroad ability, or on the back where it doesn't cool properly becuase of the low pressure cell. If I were to do it again I'd go split system. What do you guys reckon?

Take it easy, Axel.


someone on here actually did that ages ago, cant remember hwo though. looked great! i suppose downside was the normal one, blowing hot radiator air over the engine.




Reimagined/Recycled/Upcycled Cool
Memberaxel77
Learner Dubber
*


No Avatar


Posts: 11
Threads: 3
Registered: August 26th, 2006
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on September 1st, 2006 at 02:28 AM



Good point, but I reckon with the right shrouding you could overcome this. Also the scavenging effect of the air passing underneath the car would help remove the heat from the engine bay. I did see some pictures (linked from this site) from some German guys apparently with a diesel engine who used this setup.

Any further comments appreciated.

Cheers, Axel.
Memberaxel77
Learner Dubber
*


No Avatar


Posts: 11
Threads: 3
Registered: August 26th, 2006
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on September 1st, 2006 at 07:54 AM



Here's the link with some good pictures.

http://bb.bbboy.net/vwengineconversions-viewthread?forum=20&thread=23&postnum...
Membermattie182
Wolfsburg Wizard
***


No Avatar


Posts: 466
Threads: 108
Registered: August 27th, 2002
Member Is Offline

Location: Rockhampton, Central QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: Buggy On

posted on September 1st, 2006 at 12:47 PM



The guy that ownes the VW shop up here in Rocky, has two golf rad either side of his engine cooling the EJ22. He had to put bigger scoops on the side to get enough air flow, but it all works well, He even races it in Rally Sprints


Mat




Once you go flat, you never go back!!!!!!
http://www.offroadvw.net/buggybrad/Matt.gif
Membersplity65
Slammed & Awesome Dubber
**


Avatar


Posts: 75
Threads: 7
Registered: January 11th, 2005
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on September 1st, 2006 at 01:44 PM



Quote:
Originally posted by pete wood
don't tell me you call that TIDY.:(

I hated all the louvres in the front of the CBB limo. Ruined the whole front panel IMHO. But then I guess it's just my opinion.


You know Pete my mum always told me if you have nothing nice to say about something than say NOTHING.

I saw the car pictured here driving at Bondi Beach just one week ago and I would have to say I did not even nothice that grill. That is super neat. Maybe you should look up the meaning of NEAT in the dictionary.

Have a nice day. :kiss

[ Edited on 1-9-2006 by splity65 ]




http://i797.photobucket.com/albums/yy257/letterartsigns/sponsorsBanner.jpg
Membervw2b
Casual Dubber
*


No Avatar


Posts: 43
Threads: 1
Registered: August 17th, 2005
Member Is Offline

Location: South Brisbane
Theme: UltimaBB Pro Blue ( Default )

posted on September 5th, 2006 at 10:42 AM



I found some pics on the Manx Club Site : http://www.manxgallery.org/gallery/EJ22DC 

http://www.manxgallery.org/gallery/albums/EJ22DC/BradRadShroudClose.sized.jpg

Looks very neat, I wonder how it cools ?
Memberpete wood
A.k.a.: figure itout
23 Windows of Awesome
********


Avatar


Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline

Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands

posted on September 5th, 2006 at 12:57 PM



it works well, again that is part of the custom offroad ej22 conversion, like the sump on the other post.

Are you doing a subie conversion? If you are, it'd be worth going and talking to them. They do a very reasonably priced kit with almost everything you need including a garanteed motor and the rego plates I believe.




"stoopid is stronger than axles"
http://drivingnotpolishing.blogspot.com.au/ 
MemberGeorgeL
Officially Full-On Dubber
***


Avatar


Posts: 231
Threads: 11
Registered: February 5th, 2006
Member Is Offline

Location: 7200 miles off the Queensland coast
Theme: UltimaBB Pro Blue ( Default )

posted on September 6th, 2006 at 02:06 AM



Quote:
Originally posted by vw2b
I found some pics on the Manx Club Site : http://www.manxgallery.org/gallery/EJ22DC 

http://www.manxgallery.org/gallery/albums/EJ22DC/BradRadShroudClose.sized.jpg

Looks very neat, I wonder how it cools ?


It's a very clean install, but helbus' experience with this sort of setup is that it requires the electric fan running to cool sufficiently at cruising speed. This presents another failure mode that I don't fancy having.

I believe that a simple scoop and exit duct would fix this problem. Get a little stagnation pressure working for the radiator.

George


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 17.5% - SQL: 82.5% ]