| [ Total Views: 706 | Total Replies: 4 | Thread Id: 53368 ] |
|
|
 GeorgeL
Officially Full-On Dubber
Posts: 231
Threads: 11
Registered: February 5th, 2006
Member Is Offline
Location: 7200 miles off the Queensland coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 16th, 2006 at 03:28 PM |
|
|
Anyone tried an outlet thermostat on an EJ?
Considering the problems that some have with making their EJ engines cool properly with the stock coolent inlet thermostat, I was wondering if anyone
has simply removed the inlet thermostat and installed a thermostat in the more conventional location at the coolant outlet?
I've been talking to a fellow whose problem is undercooling due to his generous front-mounted radiator introducing a gulp of cold water to the engine
when the thermostat opens on a cold day, starting a pattern of thermal cycling. We thought that an outlet thermostat might moderate the cycling.
Anyone have experience with this?
George
|
|
|
klashniv
Slammed & Awesome Dubber
Posts: 82
Threads: 19
Registered: March 27th, 2006
Member Is Offline
Location: Kampala, Uganda
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 16th, 2006 at 03:58 PM |
|
|
George,
I have read about drilling a small hole in the original thermostat so that there is some flow even with the thermostat closed, therefore, reducing the
temperature difference when it opens.
Have also read that this might help with bleeding air out of the system too.
|
|
|
 helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on June 16th, 2006 at 07:10 PM |
|
|
I drilled a 6mm hole in our thermostat to allow the lower thermostat to operate in a satisfactory manner.
|
|
|
shaihulud
Custom Title Time!
Posts: 1448
Threads: 197
Registered: November 4th, 2005
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 16th, 2006 at 08:09 PM |
|
|
Well I'll be blowed. I have assumed that the thermostat on my EJ20 is an outlet model. Now I'll have to reverse my planned plumbing design. Thanks
for this thread.
|
|
|
GeorgeL
Officially Full-On Dubber
Posts: 231
Threads: 11
Registered: February 5th, 2006
Member Is Offline
Location: 7200 miles off the Queensland coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 17th, 2006 at 06:10 AM |
|
|
| Quote: | Originally
posted by shaihulud
Well I'll be blowed. I have assumed that the thermostat on my EJ20 is an outlet model. Now I'll have to reverse my planned plumbing design. Thanks
for this thread.
|
Ah, unintended benefits! Good!
I'd heard of the enlarged bleed hole to moderate the temperature in the radiator. The theory is sound, but for those of us who might travel in
subfreezing temperatures it might result in long warmup and perhaps even overcooling.
Even with an outlet thermostat you need to have a little bleed hole to move warm water from the engine to the thermostat so the thermostat can sense
the temperature. I wonder if Subaru's intent was to create a design where the radiator flow could be zero until the engine reached operating
temperature?
George
|
|
|
