| [ Total Views: 1495 | Total Replies: 7 | Thread Id: 59815 ] |
|
|
 beerdoc
A.k.a.: Doc
Insano Dub Head
Posts: 838
Threads: 42
Registered: July 27th, 2004
Member Is Offline
Location: Geelong Vic
Theme: UltimaBB Pro Blue ( Default )
Mood: Its all good
|
 posted on January 22nd, 2007 at 08:58 PM |
|
|
Rotisserie Details
Hi all Have hed a few questions on my rotisserie so I have put together a few details
Material List
75 x 75 x 3mm (i bought 2 lenghts and had this list pre cut)
8 x 1100
2 x 500
1 x 720
1 x 900
2x 400
1 x 1000
50 x 100 6mm angle x 500 (rear bumper)
10mm plate (front bumper)
Pipe is 3mm bore (i got lucky and got this from mate)
I took this idea of the net and re scaled it but because I was unsure of how balanced it would be I made my bumper mounts adjustable.I would not
bother next time and have allowed less 30mm on the pic THIS IS THE 490 MEASUREMENT which is centre to centre
The 1130 is floor to centre and my garage truss is 2300 from ground If i had more height I would make this higher
The 1200 came from offcuts and I decided to go wider on the bottom
COST doing it myself $300
I hope this helps
Cheers Doc
reVOLKS at Fyansford Geelong
20th OCT 2007 STAY TUNED FOR DETAILS
 |
|
|
beerdoc
A.k.a.: Doc
Insano Dub Head
Posts: 838
Threads: 42
Registered: July 27th, 2004
Member Is Offline
Location: Geelong Vic
Theme: UltimaBB Pro Blue ( Default )
Mood: Its all good
|
| posted on January 22nd, 2007 at 08:59 PM |
|
|
few more pics
Cheers Doc
reVOLKS at Fyansford Geelong
20th OCT 2007 STAY TUNED FOR DETAILS
|
|
|
beerdoc
A.k.a.: Doc
Insano Dub Head
Posts: 838
Threads: 42
Registered: July 27th, 2004
Member Is Offline
Location: Geelong Vic
Theme: UltimaBB Pro Blue ( Default )
Mood: Its all good
|
| posted on January 22nd, 2007 at 09:00 PM |
|
|
Cheers Doc
reVOLKS at Fyansford Geelong
20th OCT 2007 STAY TUNED FOR DETAILS
|
|
|
beerdoc
A.k.a.: Doc
Insano Dub Head
Posts: 838
Threads: 42
Registered: July 27th, 2004
Member Is Offline
Location: Geelong Vic
Theme: UltimaBB Pro Blue ( Default )
Mood: Its all good
|
| posted on January 22nd, 2007 at 09:01 PM |
|
|
Cheers Doc
reVOLKS at Fyansford Geelong
20th OCT 2007 STAY TUNED FOR DETAILS
|
|
|
kroozzn63
Bishop of Volkswagenism
Posts: 3005
Threads: 317
Registered: January 31st, 2004
Member Is Offline
Location: sydney
Theme: UltimaBB Pro Yellow
Mood: mmm coffee
|
| posted on January 22nd, 2007 at 09:14 PM |
|
|
A many times asked ,thank you for this its a saver
show us your gates
|
|
|
ruckus
Veteran Volks Folk
Posts: 2118
Threads: 165
Registered: June 19th, 2004
Member Is Offline
Location: Osaka, Japan
Theme: UltimaBB Pro Blue ( Default )
Mood: Pretty strong for a chalk-pusher
|
| posted on January 22nd, 2007 at 09:15 PM |
|
|
Geez I nearly thought we'd forgotten Daryl for a second there!
|
|
|
 BenettonVW
Super Administrator
AVD Forum Founder
Posts: 3125
Threads: 185
Registered: August 26th, 2002
Member Is Offline
Location: Country Vic, Australia
Theme: UltimaBB Pro Blue ( Default )
Mood: Slammed.. & BLINGED UP!!
|
| posted on January 23rd, 2007 at 09:04 PM |
|
|
Thanks very much for that Doc, I appreciate it. HEAPS.
I'll try to make sense of the rear attachment to the bus. I was going to attach to the front chassis where the beam bolts in, but not sure about the
rear. But you are going on both ends bumper attachments, right? And it can be suspended upside down like this okay?
THE LOWEST WITH THE MOSTEST BLING BLING WINS!!
|
|
|
beerdoc
A.k.a.: Doc
Insano Dub Head
Posts: 838
Threads: 42
Registered: July 27th, 2004
Member Is Offline
Location: Geelong Vic
Theme: UltimaBB Pro Blue ( Default )
Mood: Its all good
|
| posted on January 24th, 2007 at 06:11 PM |
|
|
No wuckas Jim
Ruckus helped me but we did not have a proper program to do measurements (its not that bad ruckus and yes I snuck daryl the chisel in when you werent
looking)
We have had the bus almost upside down but due to my garage not allowing the height
This is the reason I have suggested if you have no height probs go a little higher (200mm might do it)
Dont stess about bumper mounts takijng weight ( I did) we have 2 guys in it working at the same time on its side
It is a very basic and can be modified to suit and improved
Any questions welcome
Cheers Doc
reVOLKS at Fyansford Geelong
20th OCT 2007 STAY TUNED FOR DETAILS
|
|
|
