| [ Total Views: 792 | Total Replies: 5 | Thread Id: 74141 ] |
|
|
 RATAFIED
Seriously Crusin Dubber
Posts: 158
Threads: 50
Registered: January 17th, 2009
Member Is Offline
Location: sydney
Theme: UltimaBB Psyche Green
Mood: LOL
|
| posted on January 18th, 2009 at 03:27 PM |
|
|
front seats how
how do they cum out are they welded in or is it me that cant find the bolts
[size=6]RUST IN PEACE[/size] |
|
|
eraser
Fahrvergnugen
Posts: 970
Threads: 128
Registered: March 11th, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Powder
|
| posted on January 18th, 2009 at 04:54 PM |
|
|
having two people is normally a good idea, have one person pull the handel that lets you roll the seat forward and back, then sit in the back seat and
put your feet on the bottom of the seat and push a little with your left foot and right foot and it will move forward (make sure there isnt a spring
under the seat you need to undoo).
|
|
|
Notch Nut
Custom Title Time!
Posts: 1011
Threads: 37
Registered: April 26th, 2006
Member Is Offline
Location: unknown
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 18th, 2009 at 05:00 PM |
|
|
Look along the guide rail on the side closest to the gear stick. There should be a tab that lifts which stops the seat from coming off the rails.
Get a long screwdriver and push the tab downwards while shifting the seat forward over the tab. Once the seat is over the tab, get out of the car,
hold down the seat lever and push the seat forwards until it is off the guide rail. A one person job. Seat instillation is a reversal of the
above.
-
If you can't fix it with a hammer,
you have an electrical problem....
|
|
|
RATAFIED
Seriously Crusin Dubber
Posts: 158
Threads: 50
Registered: January 17th, 2009
Member Is Offline
Location: sydney
Theme: UltimaBB Psyche Green
Mood: LOL
|
| posted on January 19th, 2009 at 04:20 PM |
|
|
thanks guys the info you gave worked well know the seats are out
cheers
[size=6]RUST IN PEACE[/size]
|
|
|
Petey
Seriously Crusin Dubber
Posts: 166
Threads: 59
Registered: November 8th, 2006
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Grey
|
| posted on January 19th, 2009 at 04:53 PM |
|
|
Hey, does anyone know how to make these seats slide a little better, Mine are pretty damned tight, I keep having to adjust them for passengers...
|
|
|
Notch Nut
Custom Title Time!
Posts: 1011
Threads: 37
Registered: April 26th, 2006
Member Is Offline
Location: unknown
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 20th, 2009 at 04:30 PM |
|
|
Try spraying some wd40 along the guide rails. Also remove the seats and clean up any fluff and other gunk that has built up as this is a difficult
spot to vacum and keep clean. removing 40 years of gunk really can make a big difference.
If you can't fix it with a hammer,
you have an electrical problem....
|
|
|
