Board Logo
Go To Bottom

Printable Version  
[ Total Views: 594 | Total Replies: 3 | Thread Id: 82026 ]
Author: Subject:  Does anyone have a spare indicator/ignition column unit to suit a "69 type 3? ...
MemberGoldCloverLeaf
Casual Dubber
*


Avatar


Posts: 22
Threads: 4
Registered: January 25th, 2006
Member Is Offline

Location: Newtown
Theme: UltimaBB Pro Blue ( Default )

exclamation.gif posted on February 17th, 2010 at 11:09 AM
Does anyone have a spare indicator/ignition column unit to suit a "69 type 3? (pic inside)


I tried this in the parts wanted section but not much luck...

I’m after an indicator stalk and ignition barrel assembly to suit a ’69 squareback as pictured.

I need a complete unit that i can slide onto the steering column and hook up the wiring at the base.

I do not require the actual ignition barrel but ill take it if its already in there... just name your price.

A couple wires pulled out of the indicator based, i attempted to repair it as you can see but to no avail =/

Does anyone have one, or know a breaker in Sydney that might have one?

Thanks,
Michael

Error
Sorry, you must be a registered user in order to download attachments.
Member1500S
Custom Title Time!
*****


Avatar


Posts: 1418
Threads: 73
Registered: March 28th, 2005
Member Is Offline

Location: Nth Richmond, N.S.W
Theme: UltimaBB Pro Blue ( Default )

posted on February 17th, 2010 at 03:43 PM



What section isn't working?? Indicator or ignition??

DH
MemberGoldCloverLeaf
Casual Dubber
*


Avatar


Posts: 22
Threads: 4
Registered: January 25th, 2006
Member Is Offline

Location: Newtown
Theme: UltimaBB Pro Blue ( Default )

posted on February 18th, 2010 at 09:45 AM



The indicator unit... or more specifically the plastic base where the wries attach to. A couple of the wires have pulled out of it and its not really possible to do a proper repair here (i attempted this already).

And its not really viable just replacing the indicator unit, as the wires run under the metal column to a connector at the base, which would be difficult to remove without causing more damage... so yes a really need a complete unit as pictured, with or without the ignition barrel.
MemberGoldCloverLeaf
Casual Dubber
*


Avatar


Posts: 22
Threads: 4
Registered: January 25th, 2006
Member Is Offline

Location: Newtown
Theme: UltimaBB Pro Blue ( Default )

posted on February 18th, 2010 at 10:40 AM



Ok... not to worry anymore, surprisingly vintage veedub have these new on the shelf (just the indicator unit though), so i will attempt to rewire it and run the wires in a different location.

Cheers
Mike


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 11.8% - SQL: 88.2% ]