| [ Total Views: 1213 | Total Replies: 6 | Thread Id: 90138 ] |
|
|
 EgeWorks
Wolfsburg Wizard
Posts: 602
Threads: 52
Registered: January 18th, 2004
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Black
Mood: No worries
|
| posted on April 29th, 2011 at 02:30 PM |
|
|
Auto trans info
Does anyone know of any online resources with useful info about the Type 3 automatic transmission?
All the manuals I have say 'DONT TOUCH ANYTHING EVER'.
I've put some new carbs on and the gear change doesn't work properly, obviously the vacuum signature is different and I have no idea how to adjust
anything.
Any tips?
Cheers,
Eden.
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on April 29th, 2011 at 04:47 PM |
|
|
i think u need to adjust the vacuum modulator where the vacuum line goes onto the side of the box
theres a fine hex adjusting screw inside the vaccum port from memory screw in makes the change longer and screw out makes it quicker
the Haynes brown manual is pretty good on the auto contents
do u still have the origional vacuum line between the manifolds in place
|
|
|
EgeWorks
Wolfsburg Wizard
Posts: 602
Threads: 52
Registered: January 18th, 2004
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Black
Mood: No worries
|
| posted on April 30th, 2011 at 04:04 PM |
|
|
Yeah I still have the vacuum line, but as the weber manifolds are different I've had to make a new one up out of hose, not metal, but I don't think
the vacuum level is high enough for the hose to distort in any way. You don't happen to know which adjuster it is do you? I think there are three on
the side of the trans - my gut says the one closest to the vacuum port is the correct one but not sure.
My Haynes was kinda useless in the auto department.
|
|
|
vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on April 30th, 2011 at 04:09 PM |
|
|
no its the round module that screws into the gearbox
the other adjusters are for the bands
this has the vacuum hose going to it pull the hose of the module and u will see the hex head adjusting screw
|
|
|
EgeWorks
Wolfsburg Wizard
Posts: 602
Threads: 52
Registered: January 18th, 2004
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Black
Mood: No worries
|
| posted on April 30th, 2011 at 07:33 PM |
|
|
Ah I see. Much appreciated - thanks.
|
|
|
EgeWorks
Wolfsburg Wizard
Posts: 602
Threads: 52
Registered: January 18th, 2004
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Black
Mood: No worries
|
| posted on May 1st, 2011 at 11:58 AM |
|
|
Just wanted to say that all is much better now. Thanks a lot!
|
|
|
vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on May 1st, 2011 at 06:17 PM |
|
|
So did u adjust the hex screw ???
the origional metal tubbing is much better to use for vacuum over a long distance only us flex hose where u have a join
|
|
|
