| [ Total Views: 865 | Total Replies: 3 | Thread Id: 91863 ] |
|
|
 richmurphy
Learner Dubber
Posts: 5
Threads: 2
Registered: December 21st, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 30th, 2011 at 02:02 PM |
|
|
GTI wheels
I was looking on Ebay at some VW "Denver" wheels from a Polo GTI. My Superbug has a 4 bolt pattern but I'm about to overhaul the brakes anyway and
put some decent discs on the rear.
Can anyone recommend a front and rear conversion that will fit with the newer VW 5 bolt pattern? I know Volksconversions sell kits to match any bolt
pattern but are these kits any good? Are there better alternatives? |
|
|
cesiumfrog
Seriously Crusin Dubber
Posts: 161
Threads: 7
Registered: April 20th, 2005
Member Is Offline
Location: wagga
Theme: UltimaBB Pro Blue
|
| posted on July 30th, 2011 at 05:43 PM |
|
|
i've used volksconversions front discs with 5x112 vw/audi studs.....no problem. bought ball type nuts to match the wheels there also.
had the rear drums drilled and studded to match at engineer shop.
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 30th, 2011 at 05:53 PM |
|
|
Where abouts are you?
Richard Holzl at Mortlake NSW did mine - but I changed to Porsche 5 x 130 PCD
I dont know the offset of the Denvers but that plays a major part of success
So does the centre bore hole size
Futue te ipsum!!!
|
|
|
STIDUB
Custom Title Time!
Over it.
Posts: 1497
Threads: 57
Registered: June 23rd, 2008
Member Is Offline
Location: Where else but QLD :)
Theme: UltimaBB Pro Blue
Mood: Worn out, for no benefit.
|
| posted on July 30th, 2011 at 06:13 PM |
|
|
your going to need centerbores enlarged - possible problem making the wheel weak depending ho how far - your axle nut/dust cap is rather large
compared to new cars hub centers
spacers are likely to push the wheels further out in the guard, its quite a high offset so will sit in a long way
you will need narrow springs/coilovers to have room to fit it under the guard & not hit the spring
the other issue if you want to be really really fussy is technically your effectively narrowing your track, illegal in the eyes of dept of
transport
hope that helps you get your head around whats involved, it can be as easy or as complex as you like depending on interest in it being legal/insured
in future 
also, rear discs will need engineers approval/brake tests done in any state as far as im aware 
Volkswagen Drivers Club of Queensland - member
STIDUB - yep its still a work in progress
Vwdcq club car racing/ and crashing while my bug isn't finished.
The above are personal views, no more, no less |
|
|
