| [ Total Views: 1046 | Total Replies: 11 | Thread Id: 98784 ] |
|
|
 JohnnyMac
Slammed & Awesome Dubber
Posts: 80
Threads: 7
Registered: April 24th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 12th, 2012 at 10:34 PM |
|
|
Replacing the windscreen in my oval
Hi guys,
A while ago I asked about replacement screens for oval beetles. I now have a new laminated one cut that fits nicely in my new WW rubber but the auto
glass guy can't get the new trim (also WW) to fit in the rubber and stay on the glass. I am not sure what to do now and my project has come to a
stop. Anyone in Vic have experience fitting these and happy to do a cashie?
Thanks,
John.
|
|
|
steve burgess
Slammed & Awesome Dubber
Posts: 92
Threads: 10
Registered: May 21st, 2011
Member Is Offline
Location: nambour
Theme: UltimaBB Vintage
|
| posted on September 13th, 2012 at 08:00 AM |
|
|
Hi,When we did mine i held the trim in place with masking tape.Use plenty of lube when fitting and take it easy.(is the trim ss or alloy)if stainless
steel bend it to exact shape before fitting.Hope this helps Steve
1956 judson supercharged oval
1975 kombi camper
1976 kombi panel van
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on September 13th, 2012 at 08:03 AM |
|
|
read this
http://forums.aussieveedubbers.com/viewtopic.php?tid=98746
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on September 13th, 2012 at 08:26 AM |
|
|
Hi Johnny, I've done a few and the best advice I can give is use the correct/best lube. As Steve said, fit the rubber to the screen, then trim into
the rubber. I actually put some lube on the glass and the rubber but leave the majority for the opening and seal once all the trim is in as too much
lube will actually make fitting the chrome difficult as it all want's to come off the glass,
For lube, I always used and recommend Glycerine (available in liquid form from a chemist), it's what the factory used and won't hurt the rubber ,
paint or metal. The type of lube is very important. I was helping a mate the other day, he thought Silicone spray was as slippery as anything, but it
soaks into the rubber and really wasn't good enough to get the job done. After 3 or 4 tries, we used Gibbs Brand lubricant, like Glycerine, it's not
petrolium based and is super slippery. screen went straight in with little difficulty. Carefull using CRC or similar, it makes laminated screens go
foggy around the edges as the plastic laminate absorbs it.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
JohnnyMac
Slammed & Awesome Dubber
Posts: 80
Threads: 7
Registered: April 24th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 13th, 2012 at 07:20 PM |
|
|
Thanks for taking the time to reply guys, very helpful! 
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 17th, 2012 at 01:14 AM |
|
|
Um, the trim goes on after the glass and rubber are installed in the car. I managed it with a blunt wide screwdriver but a window install guy should
have the special tool that open the rubber channel and presses the trim into the channel in one movement as you push the tool around the
windscreen.
You definately have to make sure the trim is correctly bent to follow the corners or it'll just pop out. The plastic trim as far more pliable if you
soak it in hot water for 10-15mins before installing it. Metal trim should have the correct radius for the corners
madness is in the eye of the beholder  |
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on September 17th, 2012 at 04:08 PM |
|
|
| Quote: | Originally
posted by psimitar
Um, the trim goes on after the glass and rubber are installed in the car. I managed it with a blunt wide screwdriver but a window install guy should
have the special tool that open the rubber channel and presses the trim into the channel in one movement as you push the tool around the
windscreen.
You definately have to make sure the trim is correctly bent to follow the corners or it'll just pop out. The plastic trim as far more pliable if you
soak it in hot water for 10-15mins before installing it. Metal trim should have the correct radius for the corners
|
+1 I don't know why you want to try with the glass not in the car unless its a massive trim like the other thread.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on September 17th, 2012 at 04:19 PM |
|
|
Find that beat your head against the wall smiley yet Matty?
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on September 17th, 2012 at 06:33 PM |
|
|
you mean this one?
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on September 17th, 2012 at 06:41 PM |
|
|
| Quote: | Originally
posted by hellbugged
Find that beat your head against the wall smiley yet Matty?
|
we can only try.....
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 17th, 2012 at 06:51 PM |
|
|
Did I miss something? Way I read this was glass, rubber and trim were assembled off the vehicle and then put in. Sorry if i read it wrong
madness is in the eye of the beholder |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on December 27th, 2012 at 11:23 AM |
|
|
| Quote: | Originally
posted by psimitar
Did I miss something? Way I read this was glass, rubber and trim were assembled off the vehicle and then put in. Sorry if i read it wrong
|
YES
as far as I know..
that IS the way...
Difficulty - 9 out of 10... lol maybe 19 out of 20.. lol
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
