| [ Total Views: 1025 | Total Replies: 8 | Thread Id: 99829 ] |
|
|
 DubbyDo
A.k.a.: Dave
Officially Full-On Dubber
Posts: 276
Threads: 45
Registered: January 8th, 2012
Member Is Offline
Location: Pottsville NSW
Theme: UltimaBB Pro Blue
Mood: need more compreshunn!
|
| posted on November 25th, 2012 at 02:29 PM |
|
|
Shift issues
Hello everyone, I need to pick your brains. I have read a few of the threads regarding poor/no shift selection and have done all the basics, new shift
rod bushing, welding up the cage and fitting a bolt to take the slop out of the coupling. The shifter itself has been adjusted in every way with no
effect.
The drama is on downshifting I cant get 1st or 2nd without going onto the reverse lockout. Sometimes hitting reverse while trying to get 2nd. If I
just push the shifter across to the lockout I can only get 3rd and 4th. But if I want reverse then it is exactly where its supposed to be. Tried
moving the shifter to the left and the right with no success.
I have the standard shifter with a quick shift kit.
Thanks for any ideas
|
|
|
beetleboyjeff
A.k.a.: Jeff Walsh
Custom Title Time!
Posts: 1773
Threads: 40
Registered: February 13th, 2009
Member Is Offline
Location: Port Macquarie
Theme: UltimaBB Pro Blue ( Default )
Mood: Drive bugs hard
|
| posted on November 25th, 2012 at 02:47 PM |
|
|
I had similar issues when I installed a Scat shifter - I had to move it further to the right, so I elongated the holes in the shifter base further to
the left so I could move the shifter further to the right.
I am no expert, but I am guessing that you may have to do a similar thing with the quickshifter.
Another thought, try it without the quickshifter and see if that fixes the problem. If it does, then the quickshifter is the problem.
From your ole' mate Jeff
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on November 25th, 2012 at 02:56 PM |
|
|
The reverse lock out plate between the shifter and chassis tunnel could be positioned 180 degrees out.
IE: the reverse lock is on the other side.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on November 25th, 2012 at 04:35 PM |
|
|
This pic shows correct orientation, regardless of left or right hand drive.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on November 25th, 2012 at 07:36 PM |
|
|
It's the relationship of the shifter pivot to the lockout plate. In the case you've described the lockout plate needs to go right or the shifter
base left. A good basic check is to look under the back seat and remove the inspection plate, when in the 1st / 2nd plane, the coupling sits
relatively flat or the grub screw verticle, if it isn't, the crimp has slipped and the rotational alignment is out.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
DubbyDo
A.k.a.: Dave
Officially Full-On Dubber
Posts: 276
Threads: 45
Registered: January 8th, 2012
Member Is Offline
Location: Pottsville NSW
Theme: UltimaBB Pro Blue
Mood: need more compreshunn!
|
| posted on November 26th, 2012 at 04:12 PM |
|
|
| Quote: | Originally
posted by bajachris88
The reverse lock out plate between the shifter and chassis tunnel could be positioned 180 degrees out.
IE: the reverse lock is on the other side.
|
Went out and double checked the plate, its mounted correctly. I think my issue is the OEM quality coupler is sloppy as, a few weeks ago I removed it
and pulled out the dodgy bush looking setup and put a bolt through it. seems the bolt is better but now the rubber blocks are moving around a fair
bit. Would it be damaging if the coupler was made solid?
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on November 26th, 2012 at 04:36 PM |
|
|
Mine is solid as it is part of a kombi gearbox swap in the baja.
Still goes fine but you'll be suprised how much noise then gets transferred into the chassis and thus into the cabin. The gearbox vibrations just
drum through the shift rod in the tunnel. I'd rather it be a soft coupling style for comfort sake personally, but up to you.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
DylanTheDubber
Custom Title Time!
Posts: 1252
Threads: 173
Registered: June 5th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 26th, 2012 at 04:56 PM |
|
|
I had the exact same problem!
Sollution = Alot of friggin around with the shifter, quickshift kit and lockout plate to get it right.
From Dylan
|
|
|
DubbyDo
A.k.a.: Dave
Officially Full-On Dubber
Posts: 276
Threads: 45
Registered: January 8th, 2012
Member Is Offline
Location: Pottsville NSW
Theme: UltimaBB Pro Blue
Mood: need more compreshunn!
|
| posted on November 26th, 2012 at 06:59 PM |
|
|
Makes sense, will have to try and stiffen up the rubber jobbie a bit and see how it goes
|
|
|
