| [ Total Views: 1589 | Total Replies: 13 | Thread Id: 100429 ] |
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 10th, 2013 at 08:30 AM |
|
|
Fuel pressure regulator and gauge
It's about time I put a regulator on my Dells
Doesn't seem our shops sell much more than the redline dial style or the empi onle
Neither of these seem to be what I want. If I am going to put one on I would like one with the gauge.
There seem to be some on ebay -
http://www.ebay.com.au/itm/SARD-Fuel-Pressure-Regulator-with-Gauge-Gold-Color...
Has anyone used this brand - Sards - or have a better recommendation
Thanks
Futue te ipsum!!!
|
|
|
 Camo
A.k.a.: Kev
Custom Title Time!
Posts: 1936
Threads: 209
Registered: October 29th, 2007
Member Is Offline
Location: Sydney - Liverpool area
Theme: UltimaBB Pro Blue
|
| posted on January 10th, 2013 at 08:34 AM |
|
|
Price is good, but check to make sure this isn't for EFI. I know it says 0-8 but it may be x eg KPA.
My eyes aren't good enough to read the small print on the scale and it doesn't say in the add.
Kev
|
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on January 10th, 2013 at 08:37 AM |
|
|
I've had a Mallory with vdo gauge on mine for a very very long time. I remember it cost more than the pump, but I've just started looking for pump
number 3 tho 
Mines a 4207 which despite saying 4-12 psi actually adjusts fine to as low as 2
http://item.mobileweb.ebay.com.au/viewitem?itemId=390521231119&index=17&a...
It has 2 outlets so I run a single barbed banjo on each carb which you can get from our eBay buddy Alfa...
Just make sure you select one that can get down to 2.5 psi and choose a make sure it's a diaphram type
Make sure outlets match your fuel line size, best to get one that uses brass fittings so you can achieve this
|
|
|
ian.mezz
Wolfsburg Elder
I never said, I could write or spell
Posts: 3913
Threads: 280
Registered: September 11th, 2004
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy
|
| posted on January 10th, 2013 at 08:56 AM |
|
|
just pop into autobarn , they sell a few different types,
holley etc .
.
iF you running stock vw fuel pump dont need one . 
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on January 10th, 2013 at 07:20 PM |
|
|
| Quote: | Originally
posted by Bizarre
It's about time I put a regulator on my Dells
Doesn't seem our shops sell much more than the redline dial style or the empi onle
Neither of these seem to be what I want. If I am going to put one on I would like one with the gauge.
There seem to be some on ebay -
http://www.ebay.com.au/itm/SARD-Fuel-Pressure-Regulator-with-Gauge-Gold-Color...
Has anyone used this brand - Sards - or have a better recommendation
Thanks
|
Barry talk to barls as he had a few failures with lucky escapes regarding fuel in the engine bay.
|
|
|
Sides
A.k.a.: Dave Sidery
Veteran Volks Folk
Posts: 2220
Threads: 59
Registered: May 20th, 2007
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue
Mood: Need... more... shed... time...
|
| posted on January 10th, 2013 at 07:30 PM |
|
|
| Quote: | Originally
posted by hellbugged
I've had a Mallory with vdo gauge on mine for a very very long time. I remember it cost more than the pump, but I've just started looking for pump
number 3 tho
|
Can't go wrong with a Mallory IMHO
With my IDFs I ran a return style 4307 with appropriate gauge for years, and when upgraded to EFI went with Mallory again just with the different
pressure rating (4305)
Pay and cry once basically.
VWDCQ vice pres & web dude - vwdcqinc.org.au
Join a car club - get car peeps
My toys
'70 Hillclimb Bug 'Jezebel' w/- Haltech EFI - http://bit.ly/VwTNtQ
'60 KG Coupe - resto kinda started
01 New Beetle - gf's car, but I turn the spanners |
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 12th, 2013 at 01:48 PM |
|
|
| Quote: | Originally
posted by hellbugged
I've had a Mallory with vdo gauge on mine for a very very long time. I remember it cost more than the pump, but I've just started looking for pump
number 3 tho
Mines a 4207 which despite saying 4-12 psi actually adjusts fine to as low as 2
http://item.mobileweb.ebay.com.au/viewitem?itemId=390521231119&index=17&a...
It has 2 outlets so I run a single barbed banjo on each carb which you can get from our eBay buddy Alfa...
Just make sure you select one that can get down to 2.5 psi and choose a make sure it's a diaphram type
Make sure outlets match your fuel line size, best to get one that uses brass fittings so you can achieve this
|
What is the difference between a 4207 you used and the 4309 listed on ebay?
I see AC.net sells the 4309 and the VDO gauge
How does the gauge mount with the Mallory?
I assume you need to buy barbs for it?
Oh - and why do you say 2.5 lbs??
Is that what you run your carbs at??
Not 3.5lbs??
Are you running Dells or Webers??
thanks
Futue te ipsum!!!
|
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 12th, 2013 at 02:58 PM |
|
|
OK - just got a reply that they do not reccoment permanent mounting og the gauge??
Any comment on this??
Futue te ipsum!!!
|
|
|
ian.mezz
Wolfsburg Elder
I never said, I could write or spell
Posts: 3913
Threads: 280
Registered: September 11th, 2004
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy
|
| posted on January 12th, 2013 at 03:36 PM |
|
|
once you have your pressure set, theirs no need for a gauge. a fuel presure gauge is for testing problems as you cant see it when your driving.
|
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on January 12th, 2013 at 04:06 PM |
|
|
Yeah I leave the gauge on.... Been handy on the side of the road wondering why I had stopped despite the fuel pump still running.... Was a blocked
tank outlet
Yes I have dells
I run at 3 psi, but have run at 2.5 successfully too
I will double check on my part number... Wasn't much at all available in 1997 when I purchased it. Posted links to the 4307 cause it had a lower
pressure range than when I purchased mine back in the pre interweb days..... It's been on daily duties that entire time on stock to performance
engines
Yes fittings standard stuff from pirtech/ enzed etc
|
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 12th, 2013 at 04:30 PM |
|
|
OK - the 4309 is a 3 port and needs a return line
The 4207 is a 2 port - and I believe this is what I want
Futue te ipsum!!!
|
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on January 12th, 2013 at 10:20 PM |
|
|
Okies, so just checked and yes mine is 4207... Yes two outlets and gauge screws straight into a dedicated port for that purpose
Running a 90' fitting on the inlet so it can be against the firewall.... Straight fitting there would necessitate big space to run the feed line
without kinks
I'm using berg ball type inlet valves ("needle and seats") in the carbs for full flow on tiny travel so no need for higher psi on the reg to keep
bowls full
Dells are smooooooth !
|
|
|
SunshineKarmann
Casual Dubber
Posts: 34
Threads: 6
Registered: December 19th, 2008
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Always up for a chat
|
| posted on January 15th, 2013 at 12:50 PM |
|
|
Howdy,
Just running in my fresh 1904. Fitted a Holley regulator - running 36 IDF's. I have a gauge however have pulled it off once the pressure was set.
2 minute job to put it back on. One less point of failure - personal preference. Also didn't want the engine bay to look too 'gairish', save and
except the 36ers! Here's a pic showing regulator on firewall. Got a Carter rotary pump pushing fuel from the front
|
|
|
humpty
Bishop of Volkswagenism
Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline
Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!
|
| posted on January 16th, 2013 at 12:00 AM |
|
|
I ran a deadhead setup (that cheap little fuel miser FPR) on my dellorto fed bug for years without issue, but the pressure was not very consistent.
Have also found that most all pumps work better and last longer if they are hooked into a fuel return system...
Deadhead setups like you guys are talking about can kill pumps.... On my holley fed turbo bug I run a carter pump now (after killing 3 holley's), and
an aeromotive FPR (13301) with a gauge (after have loads of issues with the holley FPRs)....
I run the same FPR on my turbo efi bus.... I'll be running the aeromotive FPR on my dellorto fed ragtop too, if I ever get it finished!
Buy the best you can, you wont waste you coin like I did.
|
|
|
